Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/8.0.0/doc/param/node13.html
Дата изменения: Wed Jul 2 00:33:28 2008
Дата индексирования: Fri Sep 5 17:51:12 2008
Кодировка:

Поисковые слова: п п п п п п п п п п п п п п п п п п п
angle XMM-Newton SAS Home Page
XMM-Newton Science Analysis System


param (param-2.15) [xmmsas_20080701_1801-8.0.0]

column Parameter types time Home Index

Meta Index / Home Page / Parameter types


angle

Angle parameters are intended for right ascensions and declinations, where conversion from hours/minutes/seconds or degrees/minutes/seconds may be needed. For other angles, such as small offset angles, a real parameter is more appropriate. Note that the maximum range of the angle type is [-360,360] degrees.

The angle can be entered in one of the following formats:

   (+|-)xxdxxmxx[.xxx]s      (degrees, minutes and seconds)
   xxhxxmxx[.xxx]s           (hours, minutes and seconds)
   [(+|-)]xxx[.xxx]          (decimal degrees)

where `x' is a single digit, `d',`m',`s' and `h` are literal characters and square brackets denote optional items. The number of digits shown is not significant.

Note: Angle parameters are accessed by the task as a real value, in degrees.



XMM-Newton SOC/SSC -- 2008-07-01