Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xmm.vilspa.esa.es/sas/8.0.0/doc/siamgen/node3.html
Дата изменения: Wed Jul 2 12:59:14 2008
Дата индексирования: Fri Sep 5 18:32:40 2008
Кодировка:
Поисковые слова: п п п п п п п п п п п п п п п п п п п п п п п п п
|
XMM-Newton Science Analysis System
siamgen (ccftools-1.34) [xmmsas_20080701_1801-8.0.0]
Meta Index / Home Page
Description
siamgen
generates the SIAM matrices as specified in
the Interface Control Document[2]
for the six instruments EMOS1, EMOS2, EPN, RGS1, RGS2, OM from the
contents of the CCF Boresight constituent.
For each instrument the cal
is inquired for the corresponding
matrix on which siamgen
performs a basic ICD-compliance check
(see below).
If that checks succeeds the matrix elements are written to stdout
preceded by a header record containing the instrument ID and time
when the boresight calibration for this instrument was performed.
In order to provide the SIAM matrices to FDS according to
the Interface Control Document[2]
the output of siamgen
should be redirected into a file and
wrapped into a suitable XFTS wrapper[1].
siamgen
has no mandatory parameters. For the list of optional
parameters see below.
XMM-Newton SOC/SSC -- 2008-07-02