Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/8.0.0/doc/siamgen/node3.html
Дата изменения: Wed Jul 2 12:59:14 2008
Дата индексирования: Fri Sep 5 18:32:40 2008
Кодировка:
Поисковые слова: п п п п п п п п п п

XMM-Newton Science Analysis System


siamgen (ccftools-1.34) [xmmsas_20080701_1801-8.0.0]

Meta Index / Home Page

Description

siamgen generates the SIAM matrices as specified in the Interface Control Document[2] for the six instruments EMOS1, EMOS2, EPN, RGS1, RGS2, OM from the contents of the CCF Boresight constituent. For each instrument the cal is inquired for the corresponding matrix on which siamgen performs a basic ICD-compliance check (see below). If that checks succeeds the matrix elements are written to stdout preceded by a header record containing the instrument ID and time when the boresight calibration for this instrument was performed.

In order to provide the SIAM matrices to FDS according to the Interface Control Document[2] the output of siamgen should be redirected into a file and wrapped into a suitable XFTS wrapper[1].

siamgen has no mandatory parameters. For the list of optional parameters see below.