|
Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xmm.vilspa.esa.es/sas/8.0.0/doc/emframes/node5.html
Дата изменения: Wed Jul 2 04:50:06 2008 Дата индексирования: Fri Sep 5 19:34:06 2008 Кодировка: |
| getParamValues01 | error | |
| checkframes=yes and no input events file | ||
| readEvents01 | error | |
| invalid input events file | ||
| frames01 | error | |
| checkframes=yes and non-ODF style input frames file | ||
| frames02 | error | |
| invalid input auxiliary file | ||
| frames03 | error | |
| no data for CCDID/CCDNODE of events file in auxiliary file | ||
| frames04 | error | |
| input events file incompatible with auxiliary file | ||
| frames05 | error | |
| non increasing frame numbers over entire auxiliary file | ||
| frames06 | error | |
| invalid input counting mode file | ||
| frames08 | error | |
| a timein value larger than the cycling time has been found | ||
| readFrames03 | error | |
| invalid input frames file | ||
| readFrames04 | error | |
| input events file incompatible with frames file | ||
| getParamValues10 | warning | |
| checkframes=yes and newoutput=no (overwrite).
Skip FRAMES
corrective action: restart from auxiliary file if you wish to reapply FRAMES | ||
| getParamValues15 | warning | |
| odfeventset not set and checknvalid=Y
or setdeadtime=Y. Skip VALID and CR_DEAD
corrective action: run emframes with odfeventset set if you wish to aply VALID or CR_DEAD | ||
| readEvents10 | warning | |
| invalid input events file. Skip VALID and CR_DEAD
corrective action: check input events file | ||
| flagHk10 | warning | |
| invalid input HK GTI file. Skip FLAG_HK
corrective action: check the HK GTI file | ||
| frames10 | warning | |
| time interval not constant in data, or input file has fewer than
4 frames. Do not check FRMTIME
corrective action: check FRMTIME manually | ||
| frames11 | warning | |
| the value of CLOCK_WRAP_AROUND in the summary file is invalid.
Use 32767. This is normally all right
corrective action: check FRMTIME manually | ||
| frames12 | warning | |
| some frames were dropped from the end of the file in analysing
the data due to non-increasing frame numbers
corrective action: check FRMTIME manually | ||
| frames13 | warning | |
| duplicate frame numbers found in the input file, all but one
were dropped.
corrective action: check in the input auxiliary file that the proper frames were selected for analysis | ||
| frames14 | warning | |
| some frame numbers were found out of sequence, so the input data
were sorted.
corrective action: none | ||
| frames15 | warning | |
| frame integration time significantly different
from FRMTIME keyword. Update FRMTIME
corrective action: none | ||
| frames16 | warning | |
| aberrant time in the auxiliary file. Continue,
flag such frames and ignore or set their time approximately
corrective action: none | ||
| frames17 | warning | |
| non-increasing time in the auxiliary file. Continue,
flag such frames and ignore or set their time approximately
corrective action: none | ||
| valid10 | warning | |
| checknvalid=yes and VALID already applied.
Option ignored
corrective action: restart from auxiliary file if you wish to reapply VALID | ||
| valid11 | warning | |
| checknvalid=yes and events have frame number outside
frame interval in frames file. Continue
corrective action: none | ||
| crDead10 | warning | |
setdeadtime=yes and NPIXEL  NBELOW NABOVE 
sum of pixels in valid events. Flag as bad and continue
corrective action: none | ||
| makeGti13 | warning | |
| all frames flagged as bad. Empty output GTI file. Continue
corrective action: check the log (with verbosity set to 4 at least) to know why those frames were rejected | ||
| testDrop12 | warning | |
| more than 50% time lost. Continue
corrective action: check in the log that nothing went wrong | ||
| putGatti10 | warning | |
| setgatti=yes, but less than 255 frames. set GATTI=ROW
corrective action: if this results in systematic spGatti11 warnings in emevents, you may add the offset manually | ||
| putGatti11 | warning | |
| setgatti=yes, GATTI on but no GATTIFLG=1.
Skip PUT_GATTI. The truncated events cannot be identified
corrective action: none. This is hopeless | ||
| putGatti12 | warning | |
| setgatti=yes, GATTI on and GATTIFLG not found
at expected periodicity. Continue, it may have occurred
within a missing frame
corrective action: if this results in systematic spGatti11 warnings in emevents, do not trust the flare screening light curve | ||
| putGatti14 | warning | |
| setgatti=yes and interval between two successive GATTI
flags not equal to 510. Skip PUT_GATTI.
The truncated events cannot be identified
corrective action: check the log for frame renumbering messages. If you see where emframes erred, try renumbering the frames manually and run emframes again | ||
| createOutput10 | warning | |
| incoherence between FRMTIME and GATTIFLG.
Continue anyway (FRMTIME is probably wrong, this does
not affect the processing)
corrective action: inform SOC (this should not occur in any mode) | ||
| adjustTimetag10 | warning | |
| reconstructed source position is outside CCD. Flag frame and
continue (most likely an attitude error)
corrective action: if this is systematic, the target position RA_OBJ / DEC_OBJ may be wrong. Try providing the source position manually setting srcra/dec | ||