Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xmm.vilspa.esa.es/sas/7.1.0/doc/xcolorcod/node3.html
Дата изменения: Mon Jul 9 05:08:53 2007 Дата индексирования: Sat Dec 22 11:01:51 2007 Кодировка: Поисковые слова: missouri |
The following examples demonstrates how the color of a pixel in the final
image is computed. It is assumed there are only two events and the
image should be color-coded using the event energy as scalar attribute:
One pixel receives one photon of 1 keV and the other receives two photons
of 1 keV. Assume that in the color table 1 keV corresponds to the
color
. After adding all events the first pixel gets
color
and the second
.
Then the image is normalized: Divide by the largest value in the image and
multiply by 255. Now the first pixel has color
and the second
. Note that they have the same color but a different
intensity. So the color indicates the distribution of energy, the
intensity indicates the flux.
Some more examples using the following color table:
1 keV: (255,128,0)
8 keV: (0,50,100):
photons times energy | corresponding color | normalized against a global max of 1800 |
1x1keV | 255 128 0 | 36 18 0 |
2x1keV | 510 256 0 | 72 36 0 |
1x8keV | 0 50 100 | 0 7 14 |
1x1keV,1x8keV | 255 178 100 | 36 25 14 |
2x1keV,2x8keV | 510 356 200 | 72 50 28 |
Please note: The actual generation of the red, green, and blue component images is done through the task evselect. xcolorcod therefore inherits all of evselect's image extraction parameters which allows to control the image generation process, e.g., binning, windowing, etc.