|
Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xmm.vilspa.esa.es/sas/7.1.0/doc/rgsproc/node25.html
Дата изменения: Thu Nov 15 16:15:51 2007 Дата индексирования: Sat Dec 22 09:46:24 2007 Кодировка: |
rgsrmfgen generates the response matrices. These are required by rgsfluxer for fluxing spectra, but their true value is seen in such sophisticated analysis packages as XSPEC, where a resolution of 3000 to 5000 incident energy bins (parameter rmfbins) is recommended for good results. Unfortunately such large matrices take a lot of time to compute--massive overkill if used only for fluxing. The default resolution is set high to avoid misleading the unwary, but lowering it to rmfbins=250 is highly recommended when fluxing is the only use intended. Similarly, the default for parameter fftdim is adequate for any purposes, but fftdim=1 is faster and not too crude for fluxing (this parameter controls losses due to truncation at the wings of various distributions used in computing the response). The response matrices produced in this stage apply only to the primary source. To make the response matrices appropriate for analyzing an extended source, a customized LSF is required (parameters withangdist and withmirrorpsf).