Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/7.1.0/doc/efftplot/ChangeLog Дата изменения: Tue Dec 12 18:08:40 2006 Дата индексирования: Sat Dec 22 08:40:49 2007 Кодировка: Поисковые слова: comet tail

ChangeLog for efftplot
===============================


Version 2.17 - 2006-12-12 (NAW)
----------------------------------

Previously efftplot searched for a file produced by powspec that
contained the good points to be used in the FFT. If no file existed
efftplot stated that there were not enough good points and no plot
was produced. However, there is the case where the file can be
produced, but no plot results. This is for the case of <4 good
points. A new loop has been added to check for this situation and
no plot results in this case. This closes SSC-SPR-3638.


Version 2.16.4 - 2006-03-07 (NAW)
----------------------------------

If there were no GTIs in the GTI file, the task went ahead and
produced the output file regardless. Now the task gives a warning
and no power spectrum plot is produced. The documentation has
been updated.


Version 2.16.3 - 2005-11-29 (IMS/LUX)
-------------------------------
Last mod introduced a seg fault; now fixed.


Version 2.16.2 - 2005-11-24 (NW)
-------------------------------

Changed the error NotEnoughBins to a warning and kept the status
that no output file is produced in this case, as requested so that
there are fewer errors in the pipeline logfile. The documentation
has also been updated.


Version 2.16.1 - 2005-06-07 (NW)
-------------------------------

Changes made to DEPEND for the releasetrack version


Version 2.16 - 2005-03-03 (NW)
-------------------------------

New error (NotEnoughBins) introduced that ensures that no plot is
produced if there are too few bins to create the power density
spectrum. Documentation has been updated.


Version 2.15 - 2005-01-28 (NW)
-------------------------------

Efftplot now reads and plots the corrected source RA and DEC.


Version 2.14 - 2004-12-15 (NW)
-------------------------------

Efftplot now reads the new FITS keywords SRCNUM, SRC_RA, SRC_DEC
written into the lccorr output and writes these values on the plots
produced.


Version 2.13 - 2004-11-01 (NW)
-------------------------------

New development track version. Changes made to the presentation
of the header and title of the power spectrum. The linear plot is
now shown with the same size gap between the left and right frame.
The default is that net counts are used for the fourier transform.



Version 2.10.4 - 2004-08-27 (NW)
-------------------------------

Explicitly reads the total rates and background counts before
passing the file to powspec, so that the total rates and
background rates can be checked for negative values. The user may
now choose whether the total or net counts are used to produce the
power density spectrum, via an optional parameter `bkgsub'. The
documentation has been updated.


Version 2.10.3 - 2004-08-10 (NW)
-------------------------------

Changed error calculation for the total counts, when they are
recovered from the net and background counts.


Version 2.10.2 - 2004-08-09 (NW)
-------------------------------

This version now shows a line plot, rather than points.


Version 2.10.1 - 2004-08-01 (NW)
-------------------------------

This version now accepts a user provided GTI file. It also takes
a background subtracted lightcurve and corrects the lightcurve to
have total counts (counts + background). The error bars are no
longer plotted and there is now a space between the y-axis and the
first point, when xscale=lin is chosen. Also modifications that
were being made to the FITS header of the input file are no longer
being made (SSC-SPR-3362). The documentation has duly been updated.

Version 2.10 - 2004-07-01 (NW)
-------------------------------

Revised some of the warning statements that were unnecessary

Version 2.9 - 2004-05-14 (NW)
-------------------------------

Small changes to avoid efftplot crashing with lccorr files.

Version 2.8 - 2002-07-25 (NW)
-------------------------------

Updated the DEPEND file. It now includes a dependence on sas.


Version 2.7 - 2002-06-03 (NW)
----------------------

Made the updates necessary for the new version of param

Version 2.6.1 - 22-05-01
----------------------

The documentation has been updated to include examples of how to
use efftplot.

Version 2.6 - 06-04-01
----------------------

The test harness has been changed to be variable for Linux or
Unix, because the environment variables are different. In this
way, the test can be passed on Linux or Unix.

Version 2.5.1 - 08-02-01
-----------------------
The environment variables for `pgplot' were different to those
at the `static build' and hence the test was not passed, as the
output files were different to the comparison files. The
environment variables for `pgplot' are now changed, so the
output files of the `static build' should pass the test.


Version 2.5 - 19-12-00
----------------------
Changed the test file, so that it doesn't call gs. Also changed
the header information of the files that are written out by ftools
in efftplot, so that the headers are compatible with the SAS
software.

Version 2.4 - 31-10-00
----------------------
Updated GROUPS description and the documentation

Version 2.3 - 03-10-00
----------------------
Fix the parameter and info files
Updrade the version number as required for the SAS V5

Version 2.2.1 - 27-06-00
------------------------
SSC-SPR-1818 efftplot (version 2.2): update documentation to remove non-existant link to powspec

Version 2.2 - 22-05-00
----------------------
- Add efftplot.info file in the config directory

Version 2.1 - 18-04-00
----------------------

The following SPRs have been taken into account:

- SSC-SPR-1641 efftplot (version 2.0): documentation macros

Version 2.0 - 07-03-00
----------------------

The following SPRs have been taken into account:

SSC-SPR-1565 efftplot (version 1.3): When setting the parameter
gapfill to 1, we get the error message "value 1 is not an allowed
value

SSC-SPR-1564 efftplot (version 1.3): The values in the last
incomplete data segment have an effect on the output

SSC-SPR-1563 efftplot (version 1.3): efftplot always overwrites an
existing output file

SSC-SPR-1562 efftplot (version 1.3): There is no parameter layout
file

SSC-SPR-1561 efftplot (version 1.3): File config.par is to be
updated

SSC-SPR-1560 efftplot (version 1.3): Description paragraph should
give the definition of "normalized PDS"

SSC-SPR-1559 efftplot (version 1.3): Algorithm description should
indicate which options are used to call powspec.

Version 1.4 - 16-02-00
----------------------

- Fixes SPR-1482

Version 1.3 - 26-11-99
----------------------

- Includes a DISTRIBUTION file

Version 1.2 - 11-05-99
----------------------

- DEPEND now contains taskmain (SPR 987)
- Test harness check on whether the output file exists


Version 1.1
-----------

Remarks about this version.

Fixed SPRs:

- SSC-SPR-0738
- SSC-SPR-0739
- SSC-SPR-0740
- SSC-SPR-0745
- SSC-SPR-0746
- SSC-SPR-0748
- SSC-SPR-0749
- SSC-SPR-0750
- SSC-SPR-0751
- SSC-SPR-0752
- SSC-SPR-0753
- SSC-SPR-0754
- SSC-SPR-0755
- SSC-SPR-0756
- SSC-SPR-0757
- SSC-SPR-0758
- SSC-SPR-0759
- SSC-SPR-0760
- SSC-SPR-0761
- SSC-SPR-0765

All closed on November 13th, 1998 by DB

Version 1.0
-----------

Delivered 14/10/98


Version 0.1
----------------------------

- Directory structure created by pkgmaker.