Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/7.1.0/doc/arfgen/node35.html
Дата изменения: Thu Nov 15 16:15:39 2007
Дата индексирования: Sat Dec 22 08:39:41 2007
Кодировка:
Поисковые слова: viking 2

XMM-Newton Science Analysis System


arfgen (arfgen-1.73.3) [???]

Meta Index / Home Page

Parameters

This section documents the parameters recognized by this task (if any).

Parameter	Mand	Type	Default	Constraints
spectrumset	yes	dataset	spectrum.ds	none
Name of input spectrum dataset.
arfset	no	dataset	ancillaryfile.ds	none
Name of output ancillary response dataset.
withrmfset	no	boolean	false	none
If set, the ARF energy grid is defined by the RMF dataset specified by rmfset.
rmfset	no	dataset	responsefile.ds	none
Name of input response dataset. Used only if withrmfset is set to true.
detmaptype	no	choice	flat	dataset flat psf
The origin of the detector map: if set to dataset, then the user must specify the name of that dataset, and the table name of the map though detmaparray. If it is set to flat or psf, then the parameters detxoffset, detyoffset, detxbins and detybins define the detector map grid. In addition, psfenergy needs also to be set if detmaptype$=$ psf.
detmaparray	no	array	detmapfile.ds:	none
Name of detector map dataset and array in the DAL compound notation. Only used of detmaptype is set to dataset.
withdetbounds	no	boolean	false	none
For psf or flat detector maps. If true then the bounds of the internal detector map are taken from the parameters detxoffset and detyoffset. Otherwise, the bounds are taken from the DSS information in the spectrum dataset.
detxoffset	no	real	1200	$\rm0 <= detxoffset <= 30000$
Used if detmaptype is set to psf or flat. This defines the half-width of the detector map in DET coordinates. For example, if the source x-coordinate is $x$, the x-bounds are [$x-$detxoffset, $x+$detxoffset].
detxbins	no	integer	5	$\rm\geq 1$
Used if detmaptype is set to psf or flat. This is the number of bins along the x-axis of the map.
detyoffset	no	real	1200	$\rm0 <= detyoffset <= 30000$
Used if detmaptype is set to psf or flat. This defines the half-height of the detector map in DET coordinates. For example, if the source y-coordinate is $y$, the y-bounds are [$y-$detyoffset,$y+$detyoffset].
detybins	no	integer	5	$\rm\geq 1$
Used if detmaptype is set to psf or flat. This is the number of bins along the y-axis of the map.
psfenergy	no	real	2.0	$\rm0 \leq psfenergy \leq 30$
Used if detmaptype is set to psf. This is the energy, in keV, at which the PSF model used to construct the detector map is taken.
filterdss	no	boolean	true	none
If true, the raw detector map and the bad pixel lists are filtered using the DSS information stored in the spectrum dataset. If false, every pixel in the raw detector map is propagated to the filtered map and every bad pixel is used in the area calculation. This is a debugging parameter and should not be set to false under normal conditions.
withfilteredset	no	boolean	false	none
If true, the filtered detector map is written out to a permanent dataset, the name of which is taken from the parameter filteredset.
filteredset	no	dataset	filteredpixellist.ds	none
Name of output filtered detector map. Used only if withfilteredset is set to true.
withsourcepos	no	boolean	false	none
If true, the source position must be specified via the parameters sourcecoords, sourcex, sourcey. Otherwise, the source position is taken from the centre of the source region defined in the data subspace of the input spectrum.
sourcecoords	no	choice	eqpos	eqpos pos tel det
Used if withsourcepos$=$ true. The coordinate system for which the source position, specified by the parameter sourcex and sourcey, is defined. If sourcecoords is set to eqpos, then sourcex, sourcey correspond to RA and DEC respectively in decimal degrees. If sourcecoords$=$ pos, then sourcex, sourcey correspond to POS coordinates. (Note that the POS coordinates are defined relative to a norminal pointing position; this is taken from the global attributes REFXCRVL and REFYCRVL of the spectrum dataset.) If sourcecoords$=$ tel, then sourcex, sourcey correspond to the telescope coordinates theta (arcseconds) and phi (radians). If sourcecoords$=$ det, then sourcex, sourcey are the x and y positions of the source centre, in DET coordinates.
sourcex	no	real		none
(Used if withsourcepos$=$ true) The x-position of source centre, in terms of the coordinate system specified in sourcecoords.
sourcey	no	real		none
(Used if withsourcepos$=$ true) The y-position of source centre, in terms of the coordinate system specified in sourcecoords.
extendedsource	no	boolean	false	none
Informs arfgen as to whether the source is extended or point-like. This is currently only used for the encircled energy correction.
useodfatt	no	boolean	false	none
whether the full attitude file should be used from the OAL. If this is set to false then attitude is taken from the mean pointing position in the spectrum header.
withbadpixcorr	no	boolean	true	none
states whether CCD gap and bad pixel corrections are wanted.
badpixlocation	no	dataset	"notSpecified"	none
The name of the file containing the bad pixel locations. Usually, this will be the event file from which the spectral dataset was constructed.
ignoreoutoffov	no	boolean	yes
Whether area outside the field of view should be excluded in the arfgen calculation.
modeleffarea	no	boolean	true	none
If true, the effective area data from the CAL is taken into consideration when generating the ARF.
modelquantumeff	no	boolean	true	none
If true, the quantum efficiency data from the CAL is taken into consideration when generating the ARF.
modelfiltertrans	no	boolean	true	none
If true, the filter transmission data from the CAL is taken into consideration when generating the ARF.
modelee	no	boolean	true	none
If it is point-like (extendedsource=false), a model of the PSF positioned at a point specified by sourcex and sourcey is generated, and the fraction of the model situated within the region defined by the DSS information is computed. There is currently no encircled energy correction implementation for extended sources.
modelootcorr	no	boolean	true	none
The ARF will be decreased by a mode-dependent percentage if modelootcorr=true and if the pipeline version used to create the spectrum is older than 18 June 2001.
eegridfactor	no	integer	50	$\rm\ge 1$
Used if modelee is set to true. This is the factor which to oversample the ARF energy grid in order to perform the energy correction efficiently: The larger the factor, the faster the execution time, but the less accurate the correction.
setbackscale	no	boolean	false	none
states whether the BACKSCAL value in the input spectrum should be set to the calculated source region area.
keeparfset	no	boolean	true	none
whether the calculated ARF file should be kept or deleted. This option is included for the benefit of the backscale metatask which sets the BACKSCAL value in the input spectrum.
crossregionarf	yes	boolean	false	none
whether across-region ARF should be calculated.
crossreg_spectrumset	yes	dataset		none
Name of spectrum containing the input region.
Parameter	Mand	Type	Default	Constraints