Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/7.0.0/doc/rgsspecplot/ChangeLog Дата изменения: Mon Nov 28 22:19:30 2005 Дата индексирования: Sat Dec 22 11:45:43 2007 Кодировка: Поисковые слова: south pole

ChangeLog for rgsspecplot
===============================


Version 2.18.3 - 2005-11-28 (NW)
-------------------------------

Added a third type of spectrumtype to the labels (SRC+BKG) at
the request of IMS and have also added a further label to the
plot with information about the source.


Version 2.18.2 - 2005-11-21 (NW)
-------------------------------

Changed the limit of the number of sources allowed to 999 (from 100)
in the rgsspecplot.par file as the new pipeline was falling over
with such a low limit.


Version 2.18.1 - 2002-07-25 (NW)
-------------------------------

Only uses poissonian errors if there is no STAT_ERR column


Version 2.18 - 2002-07-25 (NW)
-------------------------------

Update the DEPEND file and now includes a dependence on sas.


Version 2.17.2 - 2002-07-25 (NW)
-------------------------------

Removed the dependency on the STAT_ERR column, now use the square
root of the counts as the error, to close the SPR 2949, `Task
unable to plot total spectrum'. Revised documentation.


Version 2.17.1 - 2002-07-01 (NW)
-------------------------------

The way that the binned up data is presented has been changed.
The errors are now the square root of the binned up counts, which
solves the problem of `plots from empty fields are negative on
average', SSC-SPR-2898. This also solves the problem SSC-SPR-2903
`Wrong wavelength and energy scales'. The x-axis has also been
extended to show the whole of the first and last bin


Version 2.17 - 2002-06-03 (NW)
-------------------------------

This version contains the changes for the new version of
param.


Version 2.16.11 - 2002-06-03 (NW)
-------------------------------

This version does not contain the changes for the new version of
param, only the new documentation.

Version 2.16.10 - 2002-06-03 (NW)
-------------------------------

Made the necessary changes for the new version of param and
updated the documentation to describe how the binning is done.


Version 2.16.9 - 2002-05-16 (NW)
-------------------------------

Extended the y-scale for the case of a spectral plot which has
maximum counts less than the maximum error, so that the error
values (which are always positive) can be viewed.

Version 2.16.8 - 2002-05-09 (NW)
-------------------------------

The data is now plotted as a histogram, as requested in SPR 2860
(histogram-style please). Documentation has been updated.


Version 2.16.7 - 2002-04-25 (NW)
-------------------------------

Extended the y-scale for the case of a spectral plot which has
only negative values, so that the error values (which are always
positive) can be viewed.



Version 2.16.6 - 2002-03-15 (NW)
-------------------------------

Added the missing error label names as requested for Version 5.3
in the documentation.


Version 2.16.5 - 2002-03-06 (NW)
-------------------------------

Changed the way in which the errors are presented, by plotting a
grey histogram of the errors on each plot. The obs id and the exp
idstr have replaced the exp id and if the data were rebinned, the
binning factor, for each plot, is displayed. However, the header
information is only displayed once on the plot. The x-axis of
both plots is now always the same as the first plot. The energy
scale has also been extended.



Version 2.16.4 - 2002-02-26 (NW)
-------------------------------

Added if-clause with warning to stop the program entering an
infinite loop if the minimum counts per bin are negative, as
noticed in SSC-SPR-2767, infinite loop.


Version 2.16.3 - 2002-02-20 (NW)
-------------------------------

Added two if-clauses with warnings (warnings documented in
documentation) to stop the program terminating with a fatal error,
when there are very few counts in the spectrum and the minimum
counts per bin requested is larger than than the number of counts
in the spectrum, as noticed in SSC-SPR-2767, subscript out of
range in rgsspecplot.


Version 2.16.2 - 2002-02-11 (NW)
-------------------------------

Changed the mode `a' to `h' in the rgsspecplot.par, as rgsspecplot
failed distribution check on linux build.


Version 2.16.1 - 2002-02-7 (NW)
-------------------------------

Rgsspecplot now plots the weighted mean, when the user requests
that the counts are rebinned to a minimum value per bin.


Version 2.16 - 2002-01-17 (NW)
-------------------------------

Rgsspecplot now plots the negative values. The object, exposure
time, ra and dec of the object, aswell as version number of
rgsspecplot have all been added to the output plot.



Version 2.15 - 2002-01-14 (NW)
-------------------------------

Rgsspecplot now reads both COUNTS or RATE and also rebins the
spectra, if requested, to a minimum value, specified by the user.


Version 2.14 - 2001-20-11 (CB)
-------------------------------
Nothin changed - uploaded on request because of some RGS problems.

Version 2.13.2 - 2001-24-10 (CB)
-------------------------------
Ammended code to use spectra produced by latest version
of rgsspecrtrum (fixes SPR 2606)



Version 2.13.1 - 2001-05-10 (CB)
-------------------------------
Ammended code to use source-list file produced by latest version
of rgssource (fixes SPR 2378)
Changed config file permissions to 644 (fixes SPR 2325)


Version 2.13 - 2001-04-05 (CB)
-------------------------------
Program modified to use the new keywords replacing BETA_REF and
BETA_WId (SPR-2320).

Version 2.12 - 2000-11-28 (CB)
-------------------------------
Diagram made clearer- no error bars drawn but a single error bar
showing the maximum error in the counts (SPR-2034).

Version 2.11.1 - 2000-10-16 (CB)
-------------------------------
Modified program to run on spectrum files produced by rgsspectrum (SPR-1977).

Version 2.11 - 2000-09-27 (CB)
-------------------------------
Ammended configuration file (SPR-1967).


===============================
Version 2.10 - 2000-09-21 (CB)
-------------------------------
Removed empty layout file.

===============================
Version 2.9 - 2000-07-20 (CB)
-------------------------------
Corrected error in dependency check.

===============================
Version 2.8 - 2000-06-30 (CB)
-------------------------------
+ (src/rgsspecplot_mod.f90) Now checks that the number of
spectrum files is either 1 or 2. (SSC-SPR-1536)
Task does not now propmpt the user for a filename if the user
requires a hardcopy (SSC-SPR-1533)
Removed several bugs and tidied up software.
Updated task to read parameters BETA_REF and BETA_WID
from SPECTRUM header of spectrum files (SSC-SPR-1813, 1534 & others).
Rectified error with wavelength scale on graph.
Graph layout changed slightly.
Check added to prevent plot file overwriting an existing one if
NO_CLOBBER set.
+ (doc/rgspecplot_description_tex) format for errors and
documentation changed. (SSC-SPR-1668).
Mandatory parameter "sourcelistset" added (SSC-SPR-1421)
Parameter description changed.
Updated plot shown in document.
+(config/rgsspecplot.par)
Parameterspectrumsets made mandatory (SSC-SPR-1535).


Version 2.7 3rd may 2000
ammended documentation form error and warning messaging

Version 2.6 30th March 2000

updated task to conform to new evselect procedure for spectrum output
format: does not use GROUPING column
reads DETCHANS, SPECVAL, SPECPIX and SPECDELT

Version 2.5 25th January 2000

- Get keywords from PRIMARY header in spectrum file
- Added check for empty spectrum file
- updated task description

Version 2.4: 21st January 2000

Updated task description
Updated test harness

Version 2.3: 6th January 2000

Updated task to comply with rgsregion 2.8 and rgsproc 0.33
Fixed energy scale offset problem.

Version 2.2: 2nd December 1999

Added DISTRIBUTION (world) file

Version
----------------------

Remarks about this version.

Open SPRs:

- 1234

Version 2.1

updated Depend file


Version 2.0

----------------------------

- Directory structure created by pkgmaker.