Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/7.0.0/doc/epatplot/ChangeLog Дата изменения: Fri Jun 2 15:45:35 2006 Дата индексирования: Sat Dec 22 08:32:06 2007 Кодировка: Поисковые слова: п п п п п п п п п п п п п п п п п п

ChangeLog for epatplot
===============================
Open SPRs:
- none

Version 1.13.7 - 2006-06-01 (HB)
--------------------------------

- (src/epatplot_mod.f90): new parameter modifyInSet: skip keyword writing
to increase speed if set to "N" (default: "Y");
mean RAWY calculation now correctly reflects
RAWX/RAWY range set on command line
- (doc/epatplot_description): new parameter added to description
- (config/epatplot.par): new parameter added

Version 1.13.6 - 2006-01-13 (HB)
--------------------------------

- (doc/epatplot_description.tex): images reduced in size to prevent
problems with latex to html converison;
SSC-SPR-3431 closed

Version 1.13.5 - 2004-07-26 (HB)
--------------------------------

- (src/epatplot_mod.f90): weights of model pattern fractions
for pile-up number calculation corrected
- (src/epatplot_mod.f90): prevented division by zero in the case of
inappropriat energy band for pile-up number
calculation
- (doc/epatplot_description.tex): new warning (no signal in observed-to-
model band) added

Version 1.13.4 - 2004-06-30 (HB)
--------------------------------

- (src/epatplot_mod.f90): new task parameter to specify energy range
for pile-up-number
- (doc/epatplot_description.tex) |
- (config/epatplot.par) |
- (config/epatplot.lyt) | new parameter added

Version 1.13.3 - 2004-03-26 (HB)
--------------------------------

- (src/epatplot_mod.f90): MOS channel-nr. calculation for obs-to-mod
fraction corrected

Version 1.13.2 - 2004-03-18 (HB)
--------------------------------

- (src/epatplot_mod.f90): CALstat_ccd set to 4 for PN multi-chip
eventsets to avoid missleading warning

Version 1.13.1 - 2004-03-16 (HB)
--------------------------------
- (config/epatplot.lyt): two missing parameters added

Version 1.13 - 2003-12-03 (HB)
-------------------------------
- (src/epatplot_mod.f90): wrong average rawy value correct; task now
doesn't attempt to modify gzip'ed input files;
problems with some background sets solved
(doc/epatlot_description.tex): description of parameter backscal extended

Version 1.12 - 2003-07-11 (HB)
-------------------------------
- (src/epatplot_mod.f90): optional input of background set to determine
background subtracted pattern fractions.
Output of pile-up diagnostic numbers.
(doc/epatplot_description.tex): some updates; low energy noise explained.

Version 1.11 - 2003-06-05 (HB)
-------------------------------

- (src/epatplot_mod.f90): usermode fixed. Now works for PN and MOS.
CAL_setState call corrected for MOS.
(doc/epatplot_description.tex): new warning described

Version 1.10 - 2003-05-09 (HB)
-------------------------------
- (src/epatplot_mod.f90): pattern fraction calibration values added to qdp output

Version 1.9 - 2003-05-07 (HB)
-------------------------------
- (config/epatplot.par): modified to enable param-2.0 functionality

Version 1.8 - 2003-02-14 (MJF)
-------------------------------
- (src/epatplot_mod.f90): new parameters "ccdlimits" (only active for PN, to
select range in RAWX, RAWY, CCDNR for the distributions) and "plotyrange"
to fix the Y range (in log10 values) for an easier comparison with other
observations (if second value is not larger than first value then do an
automatic determination as before, default "0 0")
- (config/epatplot.*): as above
- (doc/epatplot_description.tex): as above

Version 1.7 - 2002-12-19 (HB)
------------------------------
- SSC-SPR-3038 (src/epatplot_mod.f90): treatment of PN and MOS has
been unified: the MOS code now also uses pattern fractions in
channel space.
- SSC-SPR-3052 (scr/epatplot_mod.f90): RAWY set to center value of chip
if no RAWY column in input file (as in MOS timing mode)

Version 1.6 - 2002-11-13 (MJF)
-------------------------------
- (src/epatplot_mod.f90): removed obsolete code using hardcoded numbers [as in 1.1.6]

Version 1.5 - 2002-11-12 (MJF)
-------------------------------
- (src/epatplot_mod.f90): call "CAL_getPatternFraction*()" routines for EPIC MOS
- (doc/epatplot_description.tex): updated

Version 1.4 - 2002-11-11 (MJF)
-------------------------------
- (src/epatplot_mod.f90): call "CAL_getPatternFraction*()" routines for EPIC pn
- (DEPEND): needs `cal-3.149'

Version 1.3 - 2002-07-17 (MJF)
-------------------------------
- (src/epatplot_mod.f90): show also invalid PN patterns and its energy fraction (as in 1.1.5)
- (doc/epatplot_description.tex): added remark about invalid patterns (as in 1.1.5)
- (DEPEND): added "sas" as required by new infrastructure (sas-1.302)

Version 1.2 - 2002-05-15 (MJF)
-------------------------------
- (config/epatplot.par): updated for `param-2.0'
- (DEPEND): needs `param-2.0', updated all other entries to latest

Version 1.1.4 - 2002-05-15 (MJF)
--------------------------------
- (src/epatplot_mod.f90): updated LW and TI model for EPIC pn
- (src/epatplot_mod.f90): plot also singles+doubles for EPIC pn
- (src/epatplot_mod.f90): moved model and RAWY label
- (src/epatplot_mod.f90): use SRCPOS instead of mean RAWY for EPIC pn TI+BU modes

Version 1.1.3 - 2002-03-28 (MJF)
--------------------------------
- (doc/epatplot_description.tex): added an example output plot with pile-up

Version 1.1.2 - 2002-03-05 (MJF)
--------------------------------
- (src/epatplot_mod.f90): updated TI model and new BU model for EPIC pn

Version 1.1.1 - 2002-02-22 (MJF)
--------------------------------
- (src/epatplot_mod.f90): write also revolution number on plot

Version 1.1 - 2002-01-23 (MJF)
------------------------------
- (src/epatplot_mod.f90): made more robust against missing or empty extensions

Version 1.0 - 2002-01-10 (MJF)
------------------------------
- (*) converted all occurences of "eppatplot" to "epatplot"
Note: after the first "official" support of MOS in `eppatplot-1.9' the task
is renamed from `eppatplot' to `epatplot' and maintained under the new name

Version 1.9 - 2002-01-09 (MJF)
------------------------------
- (src/eppatplot_mod.f90): activated MOS1 model curves
- (config/eppatplot.par): changed default from "xaxisadu=Y" to "N"
- (config/eppatplot.info): added "MOS" to description

Version 1.8 - 2002-01-09 (MJF)
------------------------------
- (src/eppatplot_mod.f90): added MOS support for parameter `withoutputmask'

Version 1.7 - 2002-01-08 (MJF)
------------------------------
- (src/eppatplot_mod.f90): activate "xaxisadu=N" (i.e. X axis: adu -> eV)
- (src/eppatplot_mod.f90): allow creation of CCD map with FLAG==0 positions
- (config/eppatplot.*): new parameters `withoutputmask' and `outmaskname',
defaults "N" and "flag0_map_##.dat"
- (doc/eppatplot_description.tex): see above, sections: description, parameters

Version 1.6 - 2001-12-20 (MJF)
------------------------------
- (src/eppatplot_mod.f90): update SW model (calpnalgo-2.29)
- (src/eppatplot_mod.f90): allow user-defined Y-postion instead of event file
average value for the spatial model dependence
- (config/eppatplot.*): new parameters `withuserrawy' and `userrawy', defaults
"N" and "190.0"
- (doc/eppatplot_description.tex): see above

Version 1.5 - 2001-12-18 (MJF)
------------------------------
- (src/eppatplot_mod.f90): add average RAWY position to plot
- (src/eppatplot_mod.f90): strip redundant "/" and "./" from file paths
- (src/eppatplot_mod.f90): allow user-defined mode instead of SUBMODE to be
plotted as model curve in pattern distribution
- (config/eppatplot.*): new parameters `withusermode' and `usermode', defaults
"N" and "0"
- (doc/eppatplot_description.tex): see above

Version 1.4 - 2001-12-17 (MJF)
------------------------------
- (src/eppatplot_mod.f90): accept pn FastBurst mode even if no model exists

Version 1.3 - 2001-12-09 (MJF)
------------------------------
- (src/eppatplot_mod.f90): updated models, implemented spatial dependence

Version 1.2 - 2001-08-07 (MJF)
------------------------------
- (src/eppatplot_mod.f90): implemented eFF model, check if model of event file
is already implemented (otherwise do not try to plot model labels)
- (doc/eppatplot_mod.tex): updated models part

Version 1.1 - 2001-06-11 (MJF)
------------------------------
- (src/eppatplot_mod.f90): updated SW model (new high-energy CTI correction)

Version 1.0.2 - 2001-06-05 (MJF)
--------------------------------
- (src/eppatplot_mod.f90): added support for FLAG column via new parameter
"withflag", default=Y (i.e. select only events with FLAG=0), added new
warning if FLAG column is not present (continue without FLAG selection)
- (config/eppatplot.*): see above
- (doc/eppatplot_description.tex): see above
- (test/eppatplot_test): call explicitly with "withflag=Y" (default)

Version 1.0.1 - 2001-05-11 (MJF)
--------------------------------
- (src/eppatplot_mod.f90): added support for LW and TI model
- (doc/eppatplot_description.tex): updated for new models

Version 1.0 - 2001-04-23 (MJF)
------------------------------
- (src/eppatplot_mod.f90): read INSTRUME attribute

Version 0.2 - 2001-04-19 (MJF)
------------------------------
- (doc/eppatplot_description.tex): included suggestions by DL and JB
- (test/): moved test data file to new package `eptestdata'
- (DEPEND): depend on `eptestdata-0.2'

Version 0.1 - 2001-03-26 (MJF)
------------------------------
- first draft version