Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/6.5.0/doc/elcplot/ChangeLog Дата изменения: Mon Feb 21 16:27:14 2005 Дата индексирования: Sat Dec 22 07:32:34 2007 Кодировка: Поисковые слова: п п п п п п п п р п р п р п р п р п р п р п р п

ChangeLog for elcplot
===============================

Open SPRs:
----------
Nil

Version 2.1 - 2005-02-21 (NW)
----------------------------

Changed the table from which the header information is read, back
to the first extension (previous alterations having modified the
selection of the original table).


Version 2.0 - 2005-01-28 (IMS/LUX, NW)
----------------------------

Elcplot now reads and plots the corrected source RA and DEC.
Header spacings changed. Made documentation updates with regards
to all the changes made below. Updated the test harness, again
with regards to all the changes made below.

- Corrected a bug in which the time axis was always shown in seconds, regardless of the value of --units.
- FRACEXP axis label now gets plotted in same colour as data points (dark blue).
- Main header character height reduced to 0.9.

- Plot header printing now copes with negative MJD value.

- Fixed bugs in which (i) fracexp values were not being binned properly; (ii) null bkg values were being plotted as 0; (iii) funny plotting occurred when offsets were large. Number (iii) cannot be fully fixed in a simple fashion as part of the problem is pgplot's requirement for single-precision arguments.
- Made parameter --tscaleoffset mandatory.
- Added a warning to check --ounits when abs(tscaleoffset) > 10^5.
- Changed the functioning of the --offsetstyle=user behaviour back to the way it was before.
- Added a warning when the task decides to alter the value of --binsize.
- Some errors and warning calls had the task name instead of the error summary in the first field. This now fixed.
- Changed size of numeric labels from 0.9 to 0.7.

- Code rearrangement by IMS (& 1 extra parameter, --offsetstyle). cal has also been added to DEPEND. elcplot_ims may replace elcplot, this will be up to the task maintainer. Until this is decided, this package should NOT be uploaded into the official SAS.


Version 1.2.7 - 2004-09-10 (NW)
----------------------------

Default is now usegtiset=no and useflareset=no. Changed the
aesthetics of the plot as well as added further information to the
top of the plot (obs. ID, Exp. ID, Source no., original bin size).
Fixed bug that existed when using the task on Solaris (x-axis data
incorrectly plotted). Also included a new parameter - forcestart
- that the user may flag if they wish to plot the data set from
the very beginning, regardless if the observation has started yet,
and finish at the very end. Further, the RA and dec are now
written as HH:MM:SS.S and +/-DD:MM:SS.SS on the outplut plot.


Version 1.2.6 - 2004-09-03 (NW)
----------------------------

Fixed a small bug that caused the program to take the wron
Time_Vect value when there were a lot of NULL values in the file.

Version 1.2.5 - 2004-08-26 (NW)
----------------------------

All data is now plotted (previously RATE == 0.0 and BACKV == 0.0
were alllowed, but not ERROR == 0.0 and BACKE == 0.0 - all
combinations are now always plotted). The GTI and flare curves
are now plotted in their entirety, nothing is deleted. A small
bug that did not allow the negative mean rate value to be plotted
has now been rectified.

Version 1.2.4 - 2004-08-13 (NW)
----------------------------

Changed small bug introduced when converting to the code to use
time vector and also allows BACKV == 0.0 now too.

Version 1.2.3 - 2004-08-09 (NW)
----------------------------

Made sure that ONLY the NULL values are taken out and not the 0.0
values as well. The time vector (instead of the row number) is
used, as it is now provided in the input file.

Version 1.2.2 - 2004-08-02 (NW)
----------------------------

Negative net count rates are now kept and the flare lightcurve is
plotted as a line plot. Elcplot is also able to accept an input
that contains neither a GTI nor a flare file. The documentation
has been updated.

Version 1.2.1 - 2004-07-26 (NW)
----------------------------

When all the data points were negative, elcplot finished with a
fatal error, it now finishes with an error. An error is now also
given when when the user tries to run the program without a flare
nor a gti set. A warning is now raised when a non-background
subtracted file is provided and the net count rate from the total
source count rate and the background count rate is calculated and
plotted. The first and last data points are now plotted either
one or two bin widths (depending on the size of the bins) from the
plot frame and a small bug was rectified, which caused the wrong
FRACEXP value top be plotted. The full flare background is now
plotted (and not the binned lightcurve), and the colour of the
FRACEXP label now is the same as the plotted FRACEXP points. The
documentation of the task as duly been updated.


Version 1.2 - 2004-07-01 (NW)
----------------------------

There is now the option to plot the flare time series instead of
the GTI series and the user can choose to use the DATE-OBS keyword
for the offset time. Some warnings have been modified and the
documentation has been updated.


Version 1.1 - 2004-05-25 (NW)
----------------------------

A few small changes to make sure that the binsize at the top of
the plot is reported correctly, that all the GTIs are shown, that
more significant figures are shown on the x-axis label display and
to reduce the size of the points used in the timeseries and for
the FRACEXP values. The third panel showing GTIs and FRACEXP now
shows two scales one on either side of the panel, the left axis is
labelled 'GTI' and has two values marked '0' amd '1' and the right
axis is labelled 'FRACEXP' and has values marked by with the
original tickmarks. The test and the dependencies have been
modified so they pass the checks during the compilation of the
SAS. The documentation has also been updated.

Version 1.0 - 2004-05-19 (NW)
----------------------------

Elcplot, a version of lcplot with no variability tests and a
slightly modified output plot showing three windows, the net and
background lightcurves as before and the GTI and Fractional
Exposure values.


Version 0.1 - 2004-04-01
----------------------------
- Directory structure created by pkgmaker.