Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xmm.vilspa.esa.es/sas/6.5.0/doc/emchain/node11.html
Дата изменения: Tue Aug 16 09:06:09 2005 Дата индексирования: Sat Dec 22 08:51:11 2007 Кодировка: Поисковые слова: п п п п п п п п п п п |
Parameter | Mand | Type | Default | Constraints |
General parameters | ||||
ingtiset | no | string | none | |
user-supplied good time intervals | ||||
filteratt | no | boolean | no | yes/no |
filter data on bad attitude | ||||
filterhk | no | boolean | no | yes/no |
filter data on bad housekeeping | ||||
badpixfindalgo | no | string | EM | none |
EP for badpixfind, EM for embadpixfind, NO for nothing | ||||
randomize | no | string | PET | |
randomize multiswitch (P for position,
E for energy, T for time). '' for no randomisation at all | ||||
applyflaregti | no | boolean | no | yes/no |
apply the proton flare GTI | ||||
Selection parameters | ||||
odf | no | string | SAS_ODF | none |
input directory name (this is a standard SAS parameter) | ||||
exposures | no | list of strings | all | none |
selected exposures
(like S004, or simply 4 if non ambiguous) | ||||
instruments | no | list of strings | both | M1/M2 |
selected instruments | ||||
ccds | no | list of integers | all | 1-7 |
selected CCDs | ||||
Parameters for running part of emchain | ||||
runccdloop | no | boolean | yes | yes/no |
loop over CCDs | ||||
startfromodf | no | boolean | yes | yes/no |
analyse raw ODF files | ||||
stopafterbadpixfind | no | boolean | no | yes/no |
stop just after bad pixels detection to investigate | ||||
runevlistcomb | no | boolean | yes | yes/no |
merge the CCD-specific events files | ||||
makeflaregti | no | boolean | yes | yes/no |
build GTI for proton flare rejection | ||||
Parameters for debugging or calibration | ||||
rejectbadevents | no | boolean | yes | yes/no |
reject events with any of the flags in rejectionflag set | ||||
rejectionflag | no | string | 762aa000 | none |
hexadecimal representation of the flags triggering deletion | ||||
writeccdbackground | no | boolean | no | yes/no |
save CCD background for offset calibration (one file per CCD) | ||||
processlowgain | no | boolean | no | yes/no |
process data obtained in low gain read-out mode (as well as normal) | ||||
fulloutput | no | boolean | no | yes/no |
keep all columns in event list (rather than only the ones in SSC products) | ||||
applyccdgti | no | boolean | yes | yes/no |
apply the CCD-specific GTI | ||||
keepintermediate | no | boolean | no | yes/no |
keep intermediate files (or remove them on output) | ||||
stoponerror | no | boolean | no | yes/no |
stop at first error in task call | ||||
clobber | no | boolean | yes | yes/no |
overwrite existing output files | ||||
Parameters for individual tasks | ||||
withatthkgen | no | boolean | no | yes/no |
rerun atthkgen | ||||
atttol | no | real | 0.05 | ![]() |
tolerance for attitude filtering (degrees) | ||||
withbadpix | no | boolean | yes | yes/no |
run badpix | ||||
withemevents | no | boolean | yes | yes/no |
run emevents | ||||
withattcalc | no | boolean | yes | yes/no |
run attcalc | ||||
withemenergy | no | boolean | yes | yes/no |
run emenergy | ||||
lowenerbadpix | no | boolean | yes | yes/no |
run embadpixfind
a second time for energies ![]() | ||||
addvigweight | no | boolean | no | yes/no |
run evigweight | ||||
globalflare | no | boolean | yes | yes/no |
build single flare screening timeseries for the whole observation | ||||
flaretimebin | no | real | 52.0 | ![]() |
time bin for flare rejection (s) | ||||
flaremaxrate | no | real | 2.0 | ![]() |
threshold on rate
of truncated singles for tabgtigen
(cts/ks/arcmin![]() | ||||
The syntax taskname:parametername=soandso may be used to pass parameters to individual tasks called by emchain. See Sect. 3.5 for details. | ||||
Standard SAS parameters | ||||
Because emchain is a standalone Perl script, it does not deal with the standard SAS parameters (see taskmain) in exactly the same way as normal SAS tasks do:
| ||||
Parameter | Mand | Type | Default | Constraints |