Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/6.1.0/doc/emenergy/ChangeLog Дата изменения: Fri Jul 23 11:29:40 2004 Дата индексирования: Sat Dec 22 08:15:27 2007 Кодировка: Поисковые слова: mars global surveyor

Change log for emenergy
=======================

Open SPRs:
----------
None.

Version 8.1.2 - 2004-03-12 (JB)
-------------
- Could not apply CTI correction and gain correction in successive calls.

Version 8.1.1 - 2004-03-12 (JB)
-------------
- Parameter rejectbade3e4 was incorrectly called rejecte3e4 in doc.

Version 8.1 - 2003-11-28 (JB)
-----------
- Set RAWY to SRC_RAWY when calling CAL_mosCtiCorrect in Timing mode.

Version 8.0 - 2003-10-14 (JB)
-----------
- Old OFFSETS extension changed to OFFSETS0.
- Makes use of new OFFSETS extension.

Version 7.2 - 2003-08-19 (JB)
-----------
- Call to rejectE3E4 before ccdbkg to avoid contamination by wrong offsets.

Version 7.1 - 2002-11-13 (JB)
-----------
- Use supertabular for ChangeLog section in doc.

Version 7.0 - 2002-08-02 (JB)
-----------
- Remove the e3e4ellipse parameter (read from CAL).
- Remove withmaskedccdset parameter from doc.
- Use badpixutils_mod.

Version 6.6 - 2002-06-25 (JB)
-----------
- Replace reference to event attributes description.

Version 6.5 - 2002-05-27 (JB)
-----------
- Keep decimal part of dark frame background.
- Clarify warnings in code and doc.

Version 6.4 - 2002-05-07 (JB)
-----------
- Upgrade parameter file to param 2.0.

Version 6.3.1 - 2002-02-11 (JB)
-------------
- Accept bad pixels at RAWX=0.

Version 6.3 - 2001-12-07 (JB)
-----------
- Identical to 6.2.

Version 6.2 - 2001-08-17 (JB)
-----------
- Change test harness to accommodate selectlib 4.44 and cal 3.117.

Version 6.1.3 - 2001-06-18 (JB)
-------------
- Change message on PI thresholds to Sparse (src/emenergy_mod.f90).

Version 6.1.2 - 2001-06-12 (JB)
-------------
- Downgrade warning about missing BADPIX to message (src/emenergy_mod.f90).

Version 6.1.1 - 2001-04-24 (JB)
-------------
- Interface change to CAL_getMOSdarkFrameMap (src/emenergy_mod.f90).

Version 6.1 - 2001-04-17 (JB)
-----------
- Allow estimating CCD background from E4 and CCF dark frame together.

Version 6.0 - 2001-03-05 (JB)
-----------
- New fillccdbkg option to estimate CCD background where few events were found.
- rejectbade3e4 and OUT_OF_FOV flagging moved to emenergy from emevents.

Version 5.5 - 2000-12-19 (JB)
-----------
- Do not remove DATATYPE in output background map.

Version 5.4 - 2000-08-09 (JB)
-----------
- Changed dependence to emsaplib 2.0 (DEPEND).

Version 5.3.1 - 2000-06-19 (JB)
-------------
- Removed blanks from error codes (doc/emenergy_description.tex
and src/emenergy_mod.f90).

Version 5.3 - 2000-05-22 (JB)
-----------
- Upgraded to saslib 1.62.

Version 5.2 - 2000-05-17 (JB)
-----------
- Uses specific CAL_mosGainCorrect.

Version 5.1 - 2000-05-08 (JB)
-----------
- Adapt test harness to new event attribute codes.

Version 5.0 - 2000-04-15 (JB)
-----------
- Reads ENERGYEi as integer columns.
- Added parameter randomizeenergy (on by default).
- Changed column names in E4 time-series output.

Version 4.2 - 2000-04-12 (JB)
-----------
- Keep DATATYPE keyword in EXPOSURE extension.

Version 4.1 - 2000-03-10 (JB)
-----------
- Keep original event coordinates when out of CCD.

Version 4.0 - 1999-12-21 (JB)
-----------
- Removed the phacoefs parameter and calls calmosalgo.

Version 3.8 - 24-11-1999
-----------
- Large (> 2 pixels) events are not used to build background map.
- Set TLMAX for PHA/PI columns in Timing mode.

Version 3.7 - 09-11-1999
-----------
- Allow to read/write CCD background map in the absence of offsets.
- Uses new emsaplib library.

Version 3.6 - 19-10-1999
-----------
- Change test harness to adapt to new gain values.
- Includes DISTRIBUTION file.

Version 3.5 - 07-10-1999
-----------
- Changes the way the 4th coefficient in phacoefs is used.
- Adds an OFFSETS extension to the backgroundset file.
- Doc updated to sas 1.155.

Version 3.4 - 03-09-1999
-----------
- Writes proper time keywords in the time series associated with backgroundset.

Version 3.3 - 08-07-1999
-----------
- Corrects the "1 event" bug.

Version 3.2 - 09-06-1999
-----------
- Writes the XMMEA_nn keywords.
- Upgraded to CAL 3.0.
- Upgraded to saslib 1.35.

Version 3.1 - 31-05-1999
-----------
- Supports all modes.
- Simplified variable management by using parent function.
- Includes a parameter layout file.

Version 3.0 - 30-04-1999
-----------
- All parameter names changed to follow new guidelines
- Upgraded to be compatible with emutils in emevents 3.0.
- Uses the eventAttributes module.
- Uses the new CAL_setState(block) facility.
- Uses the new presentation for columns, keywords, ... in the doc.

Version 2.7 - 22-03-1999
-----------
- ROWOFFST and COLOFFST exchanged in offset file after ODF ICD clarification.
- PHA is now not corrected for CTI.
- Only the main pixel is considered when flagging "next to ...".
- Change background subtraction in MAKE_E.
- Reject events at distance 1 from borders in CCDBKG.
- Upgraded to be compatible with CAL 2.x
- Upgraded to be compatible with emutils in emevents 2.8.

Version 2.6 - 11-12-1998
-----------
- emutils_mod moved to emevents.
- Output CCD map written to primary, not to extension.

Version 2.5 - 27-11-1998
-----------
- Fixed SPR 335 (The function change_case is duplicated in other tasks).
- BADPIXTYPE changed to TYPE in bad pixels extension to follow badpix.
- Uses the new "layer" message interface.
- Uses CAL_setStateFromScienceFile.
- copyAttributes removed.
- Generic routines taken from the specific module in emframes.
- Now supports new output file when run on its own output.
- The optional CCD map in diagfile is now read from the primary array.
- Corrected various small bugs.

Version 2.4 - 25-09-1998
-----------
- Changed output format for CCD background map and time series.
- Offsets taken into account when using an external CCD background map.
- Modified to adjust to param 1.10.
- Added numerous checks against erroneous data.
- Version number jumped to 2.4 to meet that of description.

Version 2.1 - 30-07-1998
-----------
- Fixed SPR 507 (Subscript 2 of OPTBKG is out of range).
The task now uses int32 indices instead.
- Fixed SPR 509 (Test harness fails under DEC OSF).
The reference output is now produced within the test harness.
- Uses the message facility instead of the prlev parameter.

Version 2.0 - 20-07-1998
-----------
- Fixed SPR 334 (Change on/off parameters from integer to boolean).
This interface change is the reason for the new major version.
- Fixed SPR 93 (Should not check for existing file).
setExists used instead.
- Fixed SPR 97 (Need generic mechanism for parsing list of parameters).
Calls the facilities provided with the param package.
- Fixed SPR 331 (Merge README.emenergy into description).
- Fixed SPR 332 (Remove ":" and "?" from parameter labels).
- Fixed SPR 336 (Use unique error codes).
- Fixed SPR 490 (Tests fail after DAL fixes).
- Does not generate camera coordinates any longer (moved to emevents).

Version 1.1 - 26-05-1998
-----------
- Fixed SPR 88 (Task would not compile).
Calls to nint(x,kind=int16) replaced by int(x+sign(0.5,x),kind=int16).
- Fixed SPR 89 (Require .par instead of .prm).
- Fixed SPR 90 (Writes diagnostic output to stdout).
No print * anymore.
- Fixed SPR 96 (String buffer should not be used).
Use global variable errstr instead.
- parse_string accepts values separated by several blanks.
- Copy general keywords from the events extension to the primary header.
- Write TCRPX keywords associated to the DETX/DETY columns to indicate
the DETX/DETY coordinates of the detector center.
- focalLength replaced by -xmilli when computing DETX/DETY.
- Write TLMIN/TLMAX keywords for DETX/DETY.
- Coherent with CAL storage of patterns.
- CTI correction plugged in.

Version 1.0 - 22-04-1998
-----------
- Initial version for SAS v1 integration.