Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xmm.vilspa.esa.es/sas/6.0.0/doc/lccorr/node19.html
Дата изменения: Thu Mar 18 23:19:04 2004 Дата индексирования: Sat Dec 22 08:10:51 2007 Кодировка: Поисковые слова: р п р п р п р п р п р п р п р п р п р п р п р п р п |
noSrcArea | error | |
The task calculated that no events from the source data set passed the selection expression. | ||
badInstrument | error | |
Instrument not supported. | ||
tsNoData | error | |
There are no rows in the time series RATE table. | ||
tsTooManyEbands | error | |
The time series contains data in more than the 1 allowed energy band. | ||
tsBadTimeUnits | error | |
The time series has inconsistent time units. | ||
tsNoTimes | error | |
The timeseries has neither a TIME column nor a TIMEDEL keyword. | ||
tsDifferentInstrumeKwds | error | |
When a background series is supplied: source and background timeseries INSTRUME keywords don't match. | ||
tsDifferentTimeunitKwds | error | |
When a background series is supplied: source and background timeseries TIMEUNIT keywords don't match. | ||
tsDifferentMJDrefKwds | error | |
When a background series is supplied: source and background timeseries MJDREF keywords don't match. | ||
noTimeDel | error | |
No TIMEDEL information (either column or keyword) was found in the file. | ||
bkgTimeBinsLeZero | error | |
When a background series is supplied: an error during the rebinning. | ||
srcTimeBinsLeZero | error | |
When a background series is supplied: an error during the rebinning. | ||
bkgErrorsNegative | error | |
When a background series is supplied: one or more of the background ERROR values was fond to be negative. | ||
badTimeDel | error | |
The value of the TIMEDEL keyword is significantly different from the approximate value calculated from the time series itself. | ||
tsBadUncertaintyType | error | |
The POISSERR keyword is set to F, but there is no ERROR column. | ||
tsCountsLeZero | error | |
COUNT values < 0 detected. | ||
evlistWrongInstrument | error | |
The INSTRUME keyword in the event list doesn't match that of the time series. | ||
noDss | error | |
The time series has no data subspace. The task cannot determine which filtering criteria were used without this. | ||
noDssComponents | error | |
The data subspace of the time series has 0 components. The task cannot determine which filtering criteria were used in this case. | ||
noCcdsPassDss | error | |
The data subspace of the time series will not pass any values of CCDNR. | ||
evlistWrongTimeunit | error | |
The TIMEUNIT keyword in the event list doesn't match that of the time series. | ||
evlistWrongMJDref | error | |
The MJDREF keyword in the event list doesn't match that of the time series. | ||
noExposuExtensions | error | |
Events were selected for a CCD for which there is no EXPOSUnn extension in the event list. | ||
badInstrumeMode | error | |
The instrument mode is unrecognized or unsupported by lccorr. | ||
unableGetSrcPosFromDss | error | |
Source position extraction from the DSS was requested, but this was not possible. | ||
badSrcPosStyle | error | |
Unrecognized value of srcposstyle. | ||
noCcdFiltersInDssComponent | error | |
Bad DSS. | ||
noFilterThisCcdInDssComponent | error | |
Bad DSS. | ||
badChanType | error | |
Unrecognized value of the CHANTYPE keyword. Currently the only value recognized by lccorr
is `PI'. The value is set, at the time the time series is made, from the value of the -energycolumn parameter of evselect. Unfortunately the default for this at time of writing is `PHA' so to make time series which lccorr
will accept you will need to set the -energycolumn value to `PI' explicitly. | ||
noERangeOverlap | error | |
The energy ranges of the time series and the DSS don't overlap. | ||
badRegridStatus | error | |
Something went wrong with the rebinning of the PSF samples cube. You should contact the code developer. | ||
badBadPixType | error | |
The value of the TYPE column of the BADPIXnn table was not recognized. | ||
badFlagFilter | error | |
The bit-mask filter on column FLAG obtained from the data subspace was not well-formed. | ||
noBkgArea | warning | |
The task calculated that no events from the background data set passed the selection expression.
corrective action: The background time series in the output will be zero-valued. | ||
deprecatedUnit | warning | |
The unit of the time column was read as `SECONDS', but the OGIP standard specifies `s'.
corrective action: `s' is assumed. | ||
tsHasBackv | warning | |
The time series has a background column.
corrective action: This column will be discarded. | ||
noOverlap | warning | |
When a background series is supplied: the background timeseries does not overlap in time at all with the source timeseries.
corrective action: The background columns in the output will be filled with nulls. | ||
onlyPartialOverlap | warning | |
When a background series is supplied: the background timeseries does not entirely overlap in time with the source timeseries.
corrective action: The non-overlapping rows of the background columns in the output will be filled with nulls. | ||
tsNoPoisserrKwd | warning | |
There is neither a POISSERR keyword nor an ERROR column in the time series.
corrective action: Poissonian errors assumed. | ||
illegalTwoAxisDssFilter | warning | |
The data subspace contains a two-axis filter on a pair of event-list columns outside the set X/Y. RAWX/RAWY, DETX/DETY.
corrective action: The task ignores this filter. | ||
illegalDssFilterAxis | warning | |
The data subspace contains a filter on column PHA of the event list: but lccorr
cannot deal with this.
corrective action: The task ignores this filter. | ||
timeSelectionTooComplicated | warning | |
The task can handle only 1 type of time filter per CCD. However, a more complicated time-filtering scheme was found in the data subspace.
corrective action: The filter is ignored. | ||
allSpatialMapsEmpty | warning | |
None of the maps of spatial selections contained non-zero pixels for any CCD.
corrective action: None | ||
dubiousDssEnergyRange | warning | |
The energy selection recorded in the DSS appears to extend beyond the energy limits given by the E_MIN and E_MAX keywords of the time series.
corrective action: The DSS limits will be used. However the resulting exposure values might be inaccurate. | ||
dubiousCalEnergyRange | warning | |
The energy limits given by the E_MIN and E_MAX keywords of the time series appear to extend beyond the maximum extent of the energy limits defined in the cal.
corrective action: The smaller (ie, cal) limits will have to be used. | ||
badBadPixCoords | warning | |
RAWX![]() ![]() ![]() ![]() corrective action: Task ignores this row of the BADPIXnn table. | ||
inconsistentNodeInfo | warning | |
The CLOSE_TO_NODE_BOUNDARY event attribute was set, but lccorr
can't find any bits of the flag mask with this value.
corrective action: No action. | ||
pointlessWindowSelection | warning | |
The CLOSE_TO_CCD_WINDOW event attribute was set, but no events get flagged with this value by the MOS software when the window occupies the whole ccd.
corrective action: No action. |