Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/5.4.1/doc/lccorr/node18.html
Дата изменения: Fri Jan 10 22:37:47 2003
Дата индексирования: Sat Dec 22 08:11:53 2007
Кодировка:
Поисковые слова: rainbow

XMM-Newton Science Analysis System


lccorr (lccorr-2.0.5) [xmmsas_20030110_1802-5.4.1]

Meta Index / Home Page

Errors

This section documents warnings and errors generated by this task (if any). Note that warnings and errors can also be generated in the SAS infrastructure libraries, in which case they would not be documented here. Refer to the index of all errors and warnings available in the HTML version of the SAS documentation.

badInstrument		error
	Instrument not supported.
tsNoData		error
	There are no rows in the time series RATE table.
tsTooManyEbands		error
	The time series contains data in more than the 1 allowed energy band.
tsBadTunits		error
	The time series has inconsistent time units.
tsNoTimes		error
	The timeseries has neither a TIME column nor a TIMEDEL keyword.
tsDiffInstrumeKwds		error
	When a background series is supplied: source and background timeseries INSTRUME keywords don't match.
tsDiffTimeunitKwds		error
	When a background series is supplied: source and background timeseries TIMEUNIT keywords don't match.
tsDiffMJDrefKwds		error
	When a background series is supplied: source and background timeseries MJDREF keywords don't match.
bkgTimeBinsLeZero		error
	When a background series is supplied: an error during the rebinning.
srcTimeBinsLeZero		error
	When a background series is supplied: an error during the rebinning.
bkgErrorsNegative		error
	When a background series is supplied: one or more of the background ERROR values was fond to be negative.
badTimeDel		error
	The value of the TIMEDEL keyword is significantly different from the approximate value calculated from the time series itself.
tsBadUncertType		error
	The POISSERR keyword is set to F, but there is no ERROR column.
tsCountsLeZero		error
	COUNT values < 0 detected.
evlistWrongInstrument		error
	The INSTRUME keyword in the event list doesn't match that of the time series.
evlistWrongTimeunit		error
	The TIMEUNIT keyword in the event list doesn't match that of the time series.
evlistWrongMJDref		error
	The MJDREF keyword in the event list doesn't match that of the time series.
noExposuExts		error
	Events were selected for a CCD for which there is no EXPOSUnn extension in the event list.
badInstrumeMode		error
	The instrument mode is unrecognized or unsupported by lccorr.
unableGetSrcPosFromDss		error
	Source position extraction from the DSS was requested, but this was not possible.
badSrcPosStyle		error
	Unrecognized value of srcposstyle.
noCcdFiltersInDssComponent		error
	Bad DSS.
noFilterThisCcdInDssComponent		error
	Bad DSS.
bkgRegionAreaLeZero		error
	The background collection area evaluates to zero.
zeroSizeSrcRegion		error
	The source extraction region was found to have zero size.
noERangeOverlap		error
	The energy ranges of the time series and the DSS don't overlap.
undefinedERangeBounds		error
	The energy range you asked to sample is undefined.
negativeELowerBound		error
	The energy range you asked to sample starts at zero.
zeroPsfImageSize		error
	The interpolated PSF is of zero size.
badRebinStatus		error
	Something went wrong with the rebinning of the PSF samples cube.
tsHasBackv		warning
	The time series has a background column. corrective action: This column will be discarded.
noOverlap		warning
	When a background series is supplied: the background timeseries does not overlap in time at all with the source timeseries. corrective action: The background columns in the output will be filled with nulls.
onlyPartialOverlap		warning
	When a background series is supplied: the background timeseries does not entirely overlap in time with the source timeseries. corrective action: The non-overlapping rows of the background columns in the output will be filled with nulls.
tsNoPoisserrKwd		warning
	There is neither a POISSERR keyword nor an ERROR column in the time series. corrective action: Poissonian errors assumed.
allSpatialMapsEmpty		warning
	None of the maps of spatial selections contained non-zero pixels for any CCD. corrective action: None
noPartPsfArrayOnAnyChip		warning
	The array containing PSf samples falls entirely off the surface of every CCD. corrective action: none
noPartPsfArraySelected		warning
	No part of the array containing PSf samples falls within the selection region on any CCD. corrective action: none
dubiousDssEnergyRange		warning
	The energy selection recorded in the DSS appears to extend beyond the energy limits given by the E_MIN and E_MAX keywords of the time series. corrective action: The DSS limits will be used. However the resulting exposure values might be inaccurate.
dubiousCalEnergyRange		warning
	The energy limits given by the E_MIN and E_MAX keywords of the time series appear to extend beyond the maximum extent of the energy limits defined in the cal. corrective action: The smaller (ie, cal) limits will have to be used.