Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/sas/5.4.1/doc/implot/node13.html
Дата изменения: Fri Jan 10 22:39:39 2003
Дата индексирования: Sat Dec 22 08:11:48 2007
Кодировка:
Поисковые слова: п п п п п п п п п п п п п п п п п п п п п

XMM-Newton Science Analysis System


implot (implot-2.5.2) [xmmsas_20030110_1802-5.4.1]

Meta Index / Home Page

Parameters

This section documents the parameters recognized by this task (if any).

Parameter	Mand	Type	Default	Constraints
set	yes	dataset
Name of the image dataset to plot.
device	no	string	/xs
PGPLOT device, e.g. /GIF /CPS (colour Postscript) or /XW (X-windows). These are not case-sensitive.
gridstyle	no	string	ticks	ticks|grid|none
Style of grid overlay.
imagestyle	no	string	image	image|contour
Whether to draw a colour-coded image or a contour plot.
zscaletype	no	string	linear	linear|log|sqrt
The image transfer function.
colourmap	no	integer	7	-2 to 7
Colour scale: -2=reverse-rainbow, -1=reverse-greyscale, 1=grey, 2=rainbow, 3=heat, 4=IRAF, 5=AIPS, 6=TJP, 7=Rainbow+white (default).
contourstyle	no	string	number	number|separation
Style of calculation of the contour separation.
ncontours	no	integer	5	ncontours$>$1
Number of contours (valid if contourstyle=`number').
contourseparation	no	real	0.2	contourseparation$>$0
Separation of contours as a fraction of the distance between maximum and minimum (clipped) values of the image (valid if contourstyle=`separation').
withzclip	no	boolean	yes
Truncate brightest and faintest pixels?
zhistolo	no	real	0.0	$0.0\le$zhistolo$\le 1.0$
Active only if withzclip=yes. The pixels are ordered in order of increasing brightness; the minimum image brightness is then defined to be that value such that only zhistolo (as a fraction of the total number) of the pixels are fainter than this. Fainter pixels are then set to equal this lower limiting value.
zhistohi	no	real	0.999	$0.0\le$zhistohi$\le 1.0$
Active only if withzclip=yes. The pixels are ordered in order of increasing brightness; the maximum image brightness is then defined to be that value such that zhistohi (as a fraction of the total number) of the pixels are fainter than this. Brighter pixels are then set to equal this upper limiting value.
trimborder	no	boolean	yes
Trim any blank (ie, zero- or null-valued) border from the displayed image?
withframe	no	boolean	yes
Include the frame plus anciliary information to the side.
withxyclip	no	boolean	no
Display only a part of the image?
xfraclo	no	real	0.0	$0.0\le$xfraclo$\le 1.0$
Active only if withxyclip=yes. Suppose the size of the image in the x-direction (after any blank border has been removed) is $P$ pixels. Only that part of the image starting at pixel xfraclo$\times P$ is displayed. Note that xfraclo must be smaller than xfrachi.
xfrachi	no	real	1.0	$0.0\le$xfrachi$\le 1.0$
Active only if withxyclip=yes. Suppose the size of the image in the x-direction (after any blank border has been removed) is $P$ pixels. Only that part of the image ending at pixel xfrachi$\times P$ is displayed. Note that xfraclo must be smaller than xfrachi.
yfraclo	no	real	0.0	$0.0\le$yfraclo$\le 1.0$
Active only if withxyclip=yes. Suppose the size of the image in the y-direction (after any blank border has been removed) is $Q$ pixels. Only that part of the image starting at pixel yfraclo$\times Q$ is displayed. Note that yfraclo must be smaller than yfrachi.
yfrachi	no	real	1.0	$0.0\le$yfrachi$\le 1.0$
Active only if withxyclip=yes. Suppose the size of the image in the y-direction (after any blank border has been removed) is $Q$ pixels. Only that part of the image ending at pixel yfrachi$\times Q$ is displayed. Note that yfraclo must be smaller than yfrachi.
withsrclisttab	no	boolean	yes
Plot circles around source positions?
srclisttab	no	table	srclist.ds:SRCLIST
Name of the dataset+table containing the source list. Note that the name should be in two parts, separated by a colon, these comprising the name of the dataset followed by the name of the table. If the colon + table name is omitted, the first table in the dataset is used.
expression	no	string
Source selection expression, possibly involving column names, keyword values or constants. See selectlib for the grammar. Only those sources for which the expression evaluates to TRUE are plotted. The default (an empty expression) is TRUE for all sources.
ncutsortstyle	no	string	`none'	radiusup|radiusdown|expr|rownumber|none
This parameter controls how the source list is sorted before being truncated at number ncut. See the description of this parameter in subsection 3.4 but, briefly: if ncutsortstyle = `expr', the task evaluates ncutsortexpression, sorts the sources in increasing order of the result, then plots only the first ncut of them; if ncutsortstyle = `none', no sorting or truncation is done: all of the (selected) sources are plotted.
ncutsortexpression	no	string	RATE
If ncutsortstyle = `expr', the task evaluates ncutsortexpression and sorts the sources in increasing order of the result. The parameter ncut is then read and only the first ncut sources are plotted.
ncut	no	integer	30	$0\le$ncut
Maximum number of sources to plot. This parameter has no effect when ncutsortstyle = `none'.
addusersources	no	boolean	no
Plot additional sources at user-supplied positions?
userras	no	real list		$0.0\le$userras$\le 360.0$
A list of Right Ascensions of the user-added sources. This and parameter userdecs are of type `angle' described in the param task documentation.
userdecs	no	real list		$-90.0\le$userdecs$\le 90.0$
A list of Declinations of the user-added sources. This and parameter userras are of type `angle' described in the param task documentation.
userlabels	no	string list
A list of label text strings for the user-added sources.
usercolours	no	integer list		$0\le$usercolours$\le 7$
A list of colour indices for the user-added sources. These are defined as follows: 0: black. 1: white. 2: red. 3: green. 4: blue. 5: cyan. 6: purple. 7: yellow.
radiusstyle	no	string	expr	expr|psf
This parameter controls how the radii of the source circles are scaled. If radiusstyle=`psf', an ellipse is plotted about each source that represents the locus at which the intensity of the source's Point Spread Function (PSF) is equal to the background level. If radiusstyle=`expr', the expression (involving in general keywords, column names etc) found in radiusexpression is evaluated and the radii scaled from that. See subsection 3.5.
withellipse	no	boolean	no
Use an elliptical locus abround sources (radiusstyle=`psf')? (Otherwise use a circle with radius equal to the larger semiradius of the ellipse.)
bkgfraction	no	real	1.0	bkgfraction$>$ 0.0
If radiusstyle=`psf', an ellipse is generated at the locus at which the source counts per pixel (obtained from the column SCTS) equal bkgfraction times the background counts per pixel (obtained from the column BG_RATE).
radiusexpression	no	string	RATE
This parameter specifies an arithmetical expression, possibly involving column names, keyword values or constants. The result is used to scale the radii of the plotted circles.
maxradius	no	real	15.0	$1.0\le$maxradius$\le 100.0$
The maximum radius (in image pixels) of the plotted circles.
labelstyle	no	string	none	radiusup|radiusdown|expr|rownumber|none
This parameter controls how source labels are assigned. See the description of this parameter in subsection 3.6.
labelexpression	no	string	BOX_ID_SRC
If labelstyle = `expr', the task evaluates labelexpression and assigns the ordered, integer-valued source labels from the result.
labelcolour	no	integer	7	$0\le$labelcolour$\le 7$
Colour index of the plotted circle and associated label text.
labelsize	no	real	1.0	$0.0\le$labelsize
The font size to use for labels.
thickness	no	integer	1	$1\le$thickness$\le 5$
The line thickness to use for source circles.
Parameter	Mand	Type	Default	Constraints