Äîêóìåíò âçÿò èç êýøà ïîèñêîâîé ìàøèíû. Àäðåñ îðèãèíàëüíîãî äîêóìåíòà : http://xmm.vilspa.esa.es/sas/5.4.1/doc/arfgen/node30.html
Äàòà èçìåíåíèÿ: Fri Jan 10 23:25:53 2003
Äàòà èíäåêñèðîâàíèÿ: Sat Dec 22 08:11:26 2007
Êîäèðîâêà:
Ïîèñêîâûå ñëîâà: crab nebula

Errors

XMM-Newton Science Analysis System

arfgen (arfgen-1.54.7) [xmmsas_20030110_1802-5.4.1]

Meta Index / Home Page

Errors

This section documents warnings and errors generated by this task (if any). Note that warnings and errors can also be generated in the SAS infrastructure libraries, in which case they would not be documented here. Refer to the index of all errors and warnings available in the HTML version of the SAS documentation.

.

invalidInstrument		error
	The value of the `INSTRUME` attribute of the spectral file is not EMOS1, EMOS2 or EPN. (This indicates a bug - raise an SPR)
invalidArraySize		error
	The detector map array is not 2-dimensional as expected.
invalidAreaEnergyGrids		error
	The number of elements in the computed area vector do not match that in the energy grid. This indicates a bug - raise an SPR.
mapXRangeInvalid		error
	The requested X-range for the flat or psf detector map arrays is not such that `detxmin` $\rm >=$ `detxmax`. (This indicates a bug, so an SPR should be raised).
mapYRangeInvalid		error
	The requested Y-range for the flat or psf detector map arrays is not such that `detymin` $\rm >=$ `detymax`. (This indicates a bug, so an SPR should be raised).
mapSizeInvalid		error
	The number of pixels specified for the flat or psf detector maps is zero (This indicates a bug, so an SPR should be raised).
InvalidSourcePosition		error
	The source does not lie within the region corresponding to that of the detector map.
sourceCoordTypeInvalid		error
	The value of the parameter `sourcecoords` is not a valid type (this indicates a bug - raise an SPR)
NoPatterns		error
	There are no patterns in the internal list (this indicates a bug - raise an SPR.)
InvalidWCSAxes		error
	The detector map array WCS axis types were not DETX and DETY.
DSSNotFound		error
	The input spectrum does not contain a mandatory data subspace component. Arfgen needs this information to determine the position of the source on the detector among other things. Ensure that the writedss option is set true within the evselect parameters
RegionInvalid		error
	The data subspace in the input spectrum either doesn't contain region information or it is unbounded in detector coordinates.
ShapeNotHandled		error
	The data subspace contains a shape which is not recognised by arfgen
NoRmfTablePresent		error
	The rmf file specified doesn't contain an RMF table from which the energies can be extracted
ArfObjError		error
	An error has occurred within arfgen which is not understood. The most likely reason is that the software environment or the input datafile is corrupt in some way. Try redefining the SAS environment, including CCF directories and regenerate the spectrum.
BadFilterName		error
	The Filter keyword in the spectrum header is either missing or doesn't match a known filter
negativeDetmapPixel		warning
	A pixel within the detector map has a negative value. corrective action: Continue processing - the pixel would provide negative weighting to the total ARF
regUnbounded		warning
	The selected regions are unbounded along the positive or negative directions along either the DETX, DETY, X or Y axes. corrective action: continue
detmapXboundsExceeded		warning
	The extent of the selected region projected along the DETX axis exceeds the detector map bounds for that axis. corrective action: continue
detmapYboundsExceeded		warning
	The extent of the selected region projected along the DETY axis exceeds the detector map bounds for that axis. corrective action: continue
InvalidPosWCSInfo		warning
	One or more of the global attributes `REFXCTYP`, `REFXCRPX`, `REFXCRVL`, `REFXCDLT`, `REFYCTYP`, `REFYCRPX`, `REFYCRVL`, `REFYCDLT` are not present in the spectrum dataset. corrective action: Provide a dummy WCS setting, for the POS coordinate system and continue. The RA/DEC reference pointing, corresponding to `REFXCRVL` and `REFYCRVL`, is instead taken from the attributes `RA_PNT` and `DEC_PNT`
zeroSumDetmap		warning
	This means that the detector map has all zero elements. The resultant ARF will be full of zeroes. This is unimportant if arfgen has been called from backscale but is a major error if arfgen is being used standalone. If a 'flat' or 'psf' map has been used it may be that more elements are needed to fully describe the source region. An alternative possibility is that the attitude reconstruction is bad for this observation. corrective action: continue
zeroRenorm		warning
	Similar to 'zeroSumDetmap' but may mean that no detector map pixels lie within the boundaries of a CCD. This can occur if the backscale calculation is performed on a source region whose centre lies on a chip gap. corrective action: continue
NoBadPixLocations		warning
	The bad pixel file hasn't been specified on the command line or is invalid. This means that no correction for bad pixels will be applied corrective action: continue
EEoutofBounds		warning
	The circular PSF model is valid for energies upto 9keV for the MOS and 10.5 keV for EPIC-PN. This warning reminds the user that the higher energies in the ARF will be corrected for the encircled energy fraction using the 9keV PSF, which is at best an approximation corrective action: continue
EnergyOutsideValidityRange		warning
	This message comes from the CAL package and normally means that the PSF is being evaluated outside its standard range. This is usually harmless corrective action: continue
OffaxisAngleOutsideValidityRange		warning
	This means that a quantity, usually the PSF, is being evaluated at an off-axis angle outside those at which the quantity has been calibrated. The quantity relevant to the furthest off-axis calibration point is returned. corrective action: continue
NoPPSVersion		warning
	The input spectrum doesn't contain the pipeline processing version. This means that the s/w doesn't know whether it should apply the out-of-time correction or not. See section 5.11 corrective action: continue without applying out-of-time correction
NonStandardPatterns		warning
	The pattern fractions used to scale the detector Quantum Efficiency are defined for a set number of standard pattern ranges (0, 0-4, 1-4, 0-12). The task can not cope with a different pattern range and so defaults to using the full set of patterns corrective action: assume that the spectrum contains the full range of patterns
UnknownModeString		warning
	If the spectrum contains an observing mode (in the keyword SUBMODE) which is not recognised then the software assumes that the common PrimeFullWindow mode was in use. The mode is used to calculate certain calibration quantities such as the pattern fractions corrective action: PrimeFullWindow

XMM-Newton SOC/SSC -- 2003-01-10