Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.stsci.edu/~sontag/spicedocs/cspice/ekgc_c.html
Дата изменения: Sat Dec 17 06:08:53 2005 Дата индексирования: Sun Apr 10 22:51:45 2016 Кодировка: Поисковые слова: mars polar lander |
Return an element of an entry in a column of character type in a specified row.
EK
Variable I/O Description -------- --- -------------------------------------------------- selidx I Index of parent column in SELECT clause. row I Row to fetch from. elment I Index of element, within column entry, to fetch. lenout I Maximum length of column element. cdata O Character string element of column entry. null O Flag indicating whether column entry was null. found O Flag indicating whether column was present in row.
selidx is the SELECT clause index of the column to fetch from. The range of selidx is from 0 to one less than the number of columns in the SELECT clause. row is the output row containing the entry to fetch from. The range of row is from 0 to one less than the number of rows satisfying the previous query. elment is the index of the element of the column entry to fetch. The normal range of elment is from 0 to one less than the size of the column's entry, but elment is allowed to exceed the number of elements in the column entry; if it does, found is returned as SPICEFALSE. This allows the caller to read data from the column entry in a loop without checking the number of available elements first. Null values in variable-sized columns are considered to have size 1. lenout is the maximum allowed length of a string that can be fetched into the string cdata. This length must large enough to hold the specified element of the column entry, plus a null terminator. If the column element is expected to have x characters, lenout needs to be x + 1.
cdata is the requested element of the specified column entry. If the entry is null, cdata is undefined. If cdata is too short to accommodate the requested column entry element, the element is truncated on the right to fit cdata. null is a logical flag indicating whether the entry belonging to the specified column in the specified row is null. found is a logical flag indicating whether the specified element was found. If the element does not exist, found is returned as SPICEFALSE.
None.
This routine allows retrieval of data from character columns. This routine returns one element at a time in order to save the caller from imposing a limit on the size of the column entries that can be handled.
1) Suppose the EK table TAB contains the following columns: Column name Data Type Size ----------- --------- ---- CHR_COL_1 CHR 1 CHR_COL_2 CHR VARIABLE CHR_COL_3 CHR 10 Suppose the query query = "SELECT CHR_COL_1 FROM TAB" is issued to ekfind_c via the call ekfind_c ( query, lenout, nmrows, error, errmsg ); To fetch and dump column values from the rows that satisfy the query, the loop below could be used. Note that we don't check the found flags returned by ekgc_c since we know that every entry in column CHR_COL_1 contains one element. /. Since CHR_COL_1 was the first column selected, the selection index selidx is set to 0. The column is scalar, so the element index eltidx is set to 0. The variable nmrows is the number of matching rows returned by ekfind_c. ./ selidx = 0; eltidx = 0; for ( row = 0; row < nmrows; row++ ) { printf ( "\nRow = %d\n\n", row ); /. Fetch values from column CHR_COL_1. ./ ekgc_c ( selidx, row, eltidx, lenout, cval, &isnull, &found ); if ( isnull ) { printf ( "%s\n", "<null>" ); } else { printf ( "%s\n", cval ); } } 2) Suppose the EK table TAB is as in example 1, and we issue the query query = "SELECT CHR_COL_1, CHR_COL_2, CHR_COL_3 FROM TAB" to ekfind_c via the call ekfind_c ( query, lenout, &nmrows, &error, errmsg ); To fetch and dump column values from the rows that satisfy the query, the loop below could be used. Note that we don't check the found flags returned by ekgc_c since we know in advance how many elements are contained in each column entry we fetch. for ( row = 0; row < nmrows; row++ ) { printf ( "\nRow = %d\n\n", row ); /. Fetch values from column CHR_COL_1. Since CHR_COL_1 was the first column selected, the selection index selidx is set to 0. ./ selidx = 0; eltidx = 0; ekgc_c ( selidx, row, eltidx, lenout, cvals[0], &isnull, &found ); printf ( "\nColumn = CHR_COL_1\n\n" ); if ( isnull ) { printf ( "%s\n", "<null>" ); } else { printf ( "%s\n", cvals[0] ); } /. Fetch values from column CHR_COL_2 in the current row. Since CHR_COL_2 contains variable-size array entries, we call eknelt_c to determine how many elements to fetch. ./ selidx = 1; eknelt_c ( selidx, row, &nelt ); eltidx = 0; isnull = SPICEFALSE; while ( ( eltidx < nelt ) && ( !isnull ) ) { ekgc_c ( selidx, row, eltidx, lenout, cvals[eltidx], &isnull, &found ); eltidx++; /. If the column entry is null, we'll be kicked out of this loop after the first iteration. ./ } printf ( "\nColumn = CHR_COL_2\n\n" ); if ( isnull ) { printf ( "%s\n", "<null>" ); } else { for ( i = 0; i < nelt; i++ ) { printf ( "%s\n", cvals[i] ); } } /. Fetch values from column CHR_COL_3 in the current row. We need not call eknelt_c since we know how many elements are in each column entry. ./ selidx = 2; eltidx = 0; isnull = SPICEFALSE; while ( ( eltidx < 10 ) && ( !isnull ) ) { ekgc_c ( selidx, row, eltidx, lenout, cvals[eltidx], &isnull, &found ); eltidx++; } printf ( "\nColumn = CHR_COL_3\n\n" ); if ( isnull ) { printf ( "%s\n", "<null>" ); } else { for ( i = 0; i < 10; i++ ) { printf ( "%s\n", cvals[i] ); } } } 3) See the Examples section of the query routine ekfind_c for an example in which the names and data types of the columns from which to fetch data are not known in advance.
None.
1) If the input argument elment is less than 0, found is returned as SPICEFALSE, and the error SPICE(INVALIDINDEX) is signalled. However, elment is allowed to be greater than or equal to the number of elements in the specified column entry; this allows the caller to read data from the column entry in a loop without checking the number of available elements first. If elment is greater than or equal to the number of available elements, found is returned as SPICEFALSE. 2) If selidx is outside of the range established by the last query passed to eksrch_, the error SPICE(INVALIDINDEX) will be signalled. 3) If the input argument row is less than 0 or greater than or equal to the number of rows matching the query, found is returned as SPICEFALSE, and the error SPICE(INVALIDINDEX) is signalled. 4) If the specified column does not have character type, the error SPICE(INVALIDTYPE) is signalled. 5) If this routine is called when no E-kernels have been loaded, the error SPICE(NOLOADEDFILES) is signalled.
The EK "query and fetch" suite of functions reads binary `sequence component' EK files. In order for a binary EK file to be accessible to this routine, the file must be `loaded' via a call to the function eklef_c. Text format EK files cannot be used by this routine; they must first be converted by binary format by the NAIF Toolkit utility SPACIT.
N.J. Bachman (JPL)
None.
-CSPICE Version 1.1.0, 09-JUL-1998 (NJB) Bug fix: now uses local logical variable to capture the error flag value returned by the underlying f2c'd routine. -CSPICE Version 1.0.0, 27-MAR-1998 Based on SPICELIB Version 1.1.0, 07-JUL-1996 (NJB)
fetch element from character column entry