Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.stsci.edu/~mperrin/software/sources/xyz2adl.pro Дата изменения: Sat Aug 11 03:00:47 2007 Дата индексирования: Sat Mar 1 14:06:07 2014 Кодировка: Поисковые слова: р р р с р с р р р с р с р р р с с р р с р с р р п р п п р п р п р п р п

pro xyz2adl, x, y, z, astr, a, d, lambda, waveunits=waveunits
;+
; NAME:
; XYZ2ADL
;
; Like XY2AD, but for IFU data cubes containing 2 spatial and 1 spectral
; dimension.
;
; PURPOSE:
; Compute R.A., Dec, and Wavelength from X, Y, and Z and a FITS astrometry structure
; EXPLANATION:
; The astrometry structure must first be extracted by EXTAST from a FITS
; header. The offset from the reference pixel is computed and the CD
; matrix is applied. If distortion is present then this is corrected.
; If a WCS projection (Calabretta & Greisen 2002, A&A, 395, 1077) is
; present, then the procedure WCSXY2SPH is used to compute astronomical
; coordinates. Angles are returned in degrees.
;
;
; CALLING SEQUENCE:
; XYZ2ADL, x, y, z, astr, a, d, lambda
;
; INPUTS:
; X - row position in pixels, scalar or vector
; Y - column position in pixels, scalar or vector
; Z - slice position in pixels, scalar or vector
; X,Y,Z should be in the standard IDL convention (first pixel is
; 0), and not the FITS convention (first pixel is 1).
; ASTR - astrometry structure, output from EXTAST3 procedure containing:
; .CD - 3 x 3 array containing the astrometry parameters
; in DEGREES/PIXEL
; .CDELT - 3 element vector giving physical increment at reference pixel
; .CRPIX - 3 element vector giving X and Y coordinates of reference pixel
; (def = NAXIS/2)
; .CRVAL - 3 element vector giving R.A. and DEC of reference pixel
; in DEGREES
; .CTYPE - 3 element vector giving projection types
; .LONGPOLE - scalar longitude of north pole
; .LATPOLE - scalar giving native latitude of the celestial pole
; .PV2 - Vector of projection parameter associated with latitude axis
; PV2 will have up to 21 elements for the ZPN projection, up to 3
; for the SIN projection and no more than 2 for any other
; projection
; .DISTORT - Optional substructure specifying distortion parameters
;
;
; OUTPUT:
; A - R.A. in DEGREES, same number of elements as X and Y
; D - Dec. in DEGREES, same number of elements as X and Y
; Lambda - wavelength in whatever units CUNITx is
;
; OPTIONAL KEYWORD OUTPUT:
; waveunits= String giving units for wavelength axis, from header CUNIT
; keyword.
;
; RESTRICTIONS:
; Note that all angles are in degrees, including CD and CRVAL
; Also note that the CRPIX keyword assumes an FORTRAN type
; array beginning at (1,1), while X and Y give the IDL position
; beginning at (0,0). No parameter checking is performed.
;
; NOTES:
; This routine automatically determines which axis is wavelength and
; which axes are RA and Dec.
;
; The Wavelength axis MUST be linear; no other axes types are supported.
; The RA and Dec axes can be anything that will work in regular XY2AD.
;
;
; PROCEDURES USED:
; TAG_EXIST(), WCSXY2SPH
; REVISION HISTORY:
; Written by M. Perrin, UC Berkeley, based on XY2AD.PRO as of July 2, 2007.
;
;-
compile_opt idl2
if N_params() LT 6 then begin
print,'Syntax -- XYZ2ADL, x, y, z, astr, a, d, lambda'
return
endif
radeg = 180.0d/!DPI ;Double precision !RADEG


naxes = n_elements(astr.ctype)
if naxes ne 3 then begin
a = !values.f_nan
d = !values.f_nan
lambda = !values.f_nan
return
endif

; Which axis is which? Make sure all indices are scalars.

; allowable spectral coordinate type codes. Griesen et al. 2006 Table 1
wave_axes_types = ["FREQ", "ENER", "WAVN", "VRAD", "WAVE", "VOPT", "ZOPT", $
"AWAV", "VELO", "BETA"]
for i = 0,n_elements(wave_axes_types)-1 do begin
axis_lambda = where( strmid(astr.ctype,0,4) eq wave_axes_types[i], lambdact)
if lambdact eq 1 then break
endfor
; ; Check for NONSTANDARD "LAMBDA" axis type produced by Gemini GMOS IRAF
; ; pipeline
; if lambdact eq 0 then begin
; axis_lambda = where( strmid(astr.ctype,0,6) eq "LAMBDA", lambdact)
; if lambdact eq 1 then astr.ctype[axis_lambda] = "WAVE" ; make it standard!
; endif
; if still nothing, then complain
if lambdact eq 0 then message, "Did not find unique wavelength axis!" else axis_lambda=axis_lambda[0]

; now find spatial axes.
axis_ra = where( strmid(astr.ctype,0,4) eq "RA--", ract)
if ract ne 1 then message, "Did not find unique RA axis!" else axis_ra=axis_ra[0]
axis_dec = where( strmid(astr.ctype,0,4) eq "DEC-", decct)
if decct ne 1 then message, "Did not find unique Dec axis!" else axis_dec=axis_dec[0]


cd = astr.cd
crpix = astr.crpix;[[axis_ra, axis_dec]]
cdelt = astr.cdelt;[[axis_ra, axis_dec]]
ctype = astr.ctype
crval = astr.crval

for i=0,2 do if cdelt[i] NE 1.0 then cd[i,*] *= cdelt[i]

xdif = x - (crpix[0]-1)
ydif = y - (crpix[1]-1)
zdif = z - (crpix[2]-1)

if tag_exist(astr,'DISTORT') then begin
message, "Distortion not supported in XYZ2ADL!"
endif

xsi0 = cd[0,0]*xdif + cd[0,1]*ydif + cd[0,2]*zdif ;Can't use matrix notation, in
eta0 = cd[1,0]*xdif + cd[1,1]*ydif + cd[1,2]*zdif ;case X and Y are vectors
phi0 = cd[2,0]*xdif + cd[2,1]*ydif + cd[2,2]*zdif

xsiar = [ptr_new(xsi0),ptr_new(eta0),ptr_new(phi0)] ; this allows arbitrary shapes for x,y,z arrays

xsi = *(xsiar[axis_ra])
eta = *(xsiar[axis_dec])
phi = *(xsiar[axis_lambda])
ptr_free,xsiar

;------ compute wavelength axis ------
; NOTE THAT ONLY LINEAR WAVELENGTH IS ASSUMED HERE!
; This is nowhere near the full glory/gory possibilities
; allowed in the FITS spectral WCS standard.
algo = strcompress(strmid(astr.ctype[axis_lambda],4,4),/remove_all)
if algo ne '' then message, "Nonlinear wavelength axes algorithms not yet supported!"
lambda = phi + crval[axis_lambda]
waveunits = astr.cunit[axis_lambda] ; microns, nm, etc.

;------ compute spatial axes ------
coord = strmid(ctype,0,4)

; TODO does the following need updating for datacubes in any way?
reverse = ((coord[0] EQ 'DEC-') and (coord[1] EQ 'RA--')) or $
((coord[0] EQ 'GLAT') and (coord[1] EQ 'GLON')) or $
((coord[0] EQ 'ELAT') and (coord[1] EQ 'ELON'))
if reverse then begin
crval = rotate(crval,2)
temp = xsi & xsi = eta & eta = temp
endif

if strmid(ctype[0],4,1) EQ '-' then begin
WCSXY2SPH, xsi, eta, a, d, CTYPE = ctype[[axis_ra, axis_dec]], PV2 = astr.pv2, $
LONGPOLE = astr.longpole, CRVAL = crval[[axis_ra, axis_dec]], LATPOLE = astr.latpole
endif else begin
a = crval[axis_ra] +xsi & d = crval[axis_dec] + eta
endelse
return
end