Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.stsci.edu/spst/lrpg/documentation/procedures/lrpg_old_pre_baseline.html
Дата изменения: Mon May 5 02:49:19 2003 Дата индексирования: Sun Mar 2 10:03:09 2014 Кодировка: Поисковые слова: universe |
$ WEEKLY ($ SET DEF [LRP.WEEKLY])
The first thing to do is to generate a diff report between the last baselined LRP and the LRP which is to be baselined:
$ DO DIFF_LRPS WEEKLY
Print it.
$ land (filename)
The procedures of what to do then needs revision, however a general guideline may be found in the diff resolution procedure
$ DO MAIN
This command automatically sets its defaults as described below to generate baseline analysis reports for the most recent RELEASE LRP. If you need to have baseline reports for an LRP or calendar dates other than the defaults, then execute this command as follows:
Example for baseline report generation for the 97097 calendar :
<lrp_name> - The lrp that is to be baselined
<week_begin> - The week for which you are baselining
<desired_end> - The desired week for reports to end. Use three weeks
for default.
Check the file size to make sure it isn't abnormally large (e.g. < ~ 200 blocks).
$ dir/size MAIN_97097A
Print it.
$ land MAIN_97097A.RPT