Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.stsci.edu/hst/acs/documents/handbooks/current/c09_expcalc2.html
Дата изменения: Unknown Дата индексирования: Tue Apr 12 02:34:58 2016 Кодировка: Поисковые слова: storm |
![]() |
ACS Insturment Handbook for Cycle 24 |
help@stsci.edu |
9.1 This ETC calculates count rates for given source and background parameters, signal-to-noise ratios for a given exposure time, or count rates and exposure time for a given signal-to-noise ratio for imaging, spectroscopic, and coronagraphic observations. A variety of apertures are now available, both circular and square, allowing the user to either select a radius in arcseconds or a size in pixels. The current defaults are a 0.2 arcseconds radius for the WFC, and a 0.4 arcseconds radius for SBC observations, which enclose approximately 80% of the PSF flux. Square and circular apertures are available between 0.1 and 2.0 arcseconds. For extended sources the S/N calculation is based on counts summed over one resolution element of 2 x 2 pixels, as the source size is assumed to be larger than the ACS resolution. A calibrated spectrum of your source can be provided directly to the ETC. The ETC also determines peak per-pixel count rates and total count rates to aid in feasibility assessment. Warnings appear if the source exceeds the local or global brightness limits for SBC observations (see Section 7.2). The ETC has online help for its execution and interpretation of results. Alternatively, users can use synphot1 in STSDAS to calculate count rates and the wavelength distribution of detected counts.Synphot will soon be replaced by the pysynphot package, a significantly improved re-implementation of Synphot written in Python. Please visit the pysynphot webpage at http://stsdas.stsci.edu/pysynphot for updates.