Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.stsci.edu/ftp/documents/p2pi/HTMLjavahelpCy20/ch12_acs2.html
Дата изменения: Thu May 31 18:26:08 2012 Дата индексирования: Mon Apr 11 17:43:17 2016 Кодировка: Поисковые слова: п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п |
Space Telescope Science Institute |
Cycle 20 Phase II Proposal Instructions |
The Instrument Configurations and Operating Modes described in this chapter are used for the Visit and Exposure Specifications. The legal Visit and Exposure Specifications entries are discussed in the following sections. More complete descriptions of Instrument Configurations, Modes, Apertures, Spectral Elements, etc. are available in the ACS Instrument Handbook.Many of the Optional Parameters have default values. In such cases an Optional Parameter entry in these Specifications is necessary only if it is desired to override the default value. In the STScI proposal system, the physical units of Optional Parameter quantities are always implicit and should never be entered by the observer.The following tables list the permitted Instrument Configurations, Operating Modes, Apertures, Spectral Elements, and Optional Parameters for the ACS.
Spectral Elements Optional Parameters WFC, WFC-FIX, WFC1, WFC2,
WFC1-CTE, WFC1-FIX, WFC2-FIX
WFCENTER,
WFC1-512,
WFC1-1K,
WFC1-2K,
WFC1-IRAMP,
WFC1-MRAMP,
WFC2-MRAMP,
WFC2-ORAMP,
WFC1-IRAMPQ,
WFC1-MRAMPQ,
WFC2-ORAMPQ CR-SPLIT,
IMAGE