Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.sai.msu.su/~er/xntp/rdebug.html
Дата изменения: Unknown Дата индексирования: Sat Dec 22 01:46:50 2007 Кодировка: Поисковые слова: mercury program |
The ntpq
and xntpdc
utility programs can be used to
debug reference clocks, either on the server itself or from another
machine elsewhere in the network. The server is compiled, installed and
started using the command-line switches described in the xntpd
page. The first thing to look for
are error messages on the system log. If none occur, the daemon has
started, opened the devices specified and waiting for peers and radios
to come up.
The next step is to be sure the RS232 messages, if used, are getting to and from the clock. The most reliable way to do this is with an RS232 tester and to look for data flashes as the driver polls the clock and/or as data arrive from the clock. Our experience is that the overwhelming fraction of problems occurring during installation are due to problems such as miswired connectors or improperly configured device links at this stage.
If RS232 messages are getting to and from the clock, the variables of
interest can be inspected using the ntpq
program and
various commands described on the documentation page. First, use the
pe
and as
commands to display billboards
showing the peer configuration and association IDs for all peers,
including the radio clock peers. The assigned clock address should
appear in the pe
billboard and the association ID for it at
the same relative line position in the as
billboard. If
things are operating correctly, after a minute or two samples should
show up in the pe
display line for the clock.
Additional information is available with the rv
and
clockvar
commands, which take as argument the association
ID shown in the as
billboard. The rv
command
with no argument shows the system variables, while the rv
command with association ID argument shows the peer variables for the
clock, as well as any other peers of interest. The clockvar
command with argument shows the peer variables specific to reference
clock peers, including the clock status, device name, last received
timecode (if relevant), and various event counters. In addition, a
subset of the fudge
parameters is included.
The xntpdc
utility program can be used for detailed
inspection of the clock driver status. The most useful are the
clockstat
and commands described in the
document page. While these commands permit getting quite personal with
the particular driver involved, their use is seldom necessary, unless an
implementation bug shows up.
Most drivers write a message to the clockstats
file as
each timecode or surrogate is received from the radio clock. By
convention, this is the last ASCII timecode (or ASCII gloss of a binary-
coded one) received from the radio clock. This file is managed by the
filegen
facility described in the xntpd
page
and requires specific commands in the configuration file. This forms a
highly useful record to discover anomalies during regular operation of
the clock. The scripts included in the ./scripts/stats
directory can be run from a cron
job to collect and
summarize these data on a daily or weekly basis. The summary files have
proven invaluable to detect infrequent misbehavior due to clock
implementation bugs in some radios.