Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.sao.ru/precise/Midas_doc/doc/95NOV/vol2/node391.html
Дата изменения: Fri Feb 23 12:58:19 1996
Дата индексирования: Tue Oct 2 18:04:47 2012
Кодировка:
Поисковые слова: п п п п п п п п п п п

Available Commands

Next: ASTROMET/TRANSFORM Up: ASTROMET astrometry package Previous: Introduction

Available Commands

The context ASTROMET can be enabled by the command SET/CONTEXT ASTROMET. While in the original implementation everything was done in one programme, in the context ASTROMET the software is split into three commands. These commands take care of the following:

read the measurements and standard stars, and compute the transformation parameters (this step is performed by the command ASTROMET/TRANSFORM);
edit the standard star table to remove/restore some stars (this step is performed by the command ASTROMET/EDIT);
actually compute the converted coordinates (this step is performed by the command ASTROMET/COMPUTE).

Steps 1 and 2 can be iterated until a satisfactory result is obtained.

The whole process can also be executed in an iterative way by the command ASTROMET/POS1. This commands asks for all input parameters.

Rein Warmels
Mon Jan 22 15:08:15 MET 1996