Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.sao.ru/precise/Midas_doc/doc/95NOV/vol2/node160.html
Дата изменения: Fri Feb 23 12:57:26 1996 Дата индексирования: Tue Oct 2 17:51:01 2012 Кодировка: Поисковые слова: внешние плбоефщ |
A preliminary step to the wavelength calibration consists of extracting the orders of the WLC image which can then be used to determine the dispersion relation in two steps:
The command IDENTIFY/ECHELLE involves the echelle relation and requires the identification of two lines in overlapped regions of adjacent orders (method PAIR). The calibration can as well be performed for spectra which orders are not overlapped, this time requiring a minimum of four identifications (method ANGLE). Both methods are based on the echelle relation and therefore are not applicable if the disperser is not an echelle grating, as it is the case for EFOSC which involves a grism disperser. The method TWO-D allows to start directly the calibration with a two-dimensional fitting polynomial and requires more initial identifications. In case of several observations with the same, or near the same instrumental configuration, it is possible to use the global dispersion model from a previous calibration. The method GUESS implements this mode of operation. Two additional methods RESTART and ORDER are available. The selection of the method is performed by assigning a value to the echelle keyword WLCMTD.
Solutions are computed either for each independent order ( WLCOPT=1D) or using a global bivariate polynomial ( WLCOPT=2D).