Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.sao.ru/precise/Midas_doc/doc/95NOV/vol2/node153.html
Дата изменения: Fri Feb 23 12:57:25 1996 Дата индексирования: Tue Oct 2 17:50:39 2012 Кодировка: Поисковые слова: п п п п |
The estimation of the background is one of the critical points in the reduction of echelle spectra for two reasons. On one side, a correct estimate of the background level is necessary to compute the true flux of the object spectrum; on the other side, a wrong estimate of the background in either the flat field image ( FLAT), the object ( OBJ) or (optionally) the standard star ( STD), will severely affect the accuracy with which instrumental effects -- such as the blaze -- can be corrected for. The background in an echelle image consists of:
The first three components are removed during the preprocessing as described
in Appendix . Correction for the general scattered light
and diffuse light background is presented in the three following sections.
Correction for the sky background is presented in Section
.
The remaining background due to scattered light is estimated from points located in the interorder space. These locations are defined when performing the order definition (command DEFINE/ECHELLE or DEFINE/HOUGH) and can be displayed by command LOAD/ECHELLE. The order definition is used to create a table back.tbl containing the background positions. Unscanned areas of the CCD can be avoided in the background estimate by using the command SCAN/ECHELLE. If bright features (e.g. sky lines) are located at the same location as background points, these locations must be unselected from table back.tbl using SELECT/BACKGROUND. Selection of the method is possible by assignment of a value to the echelle keyword BKGMTD and the background estimate, subtraction and update of the descriptor BACKGROUND is performed by the command SUBTRACT/BACKGROUND