Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.sao.ru/precise/Midas_doc/doc/94NOV/vol2/node482.html
Дата изменения: Fri Feb 23 14:03:10 1996 Дата индексирования: Tue Oct 2 19:01:59 2012 Кодировка: Поисковые слова: m 63 |
The parameter WIDTH2 is the width of the calibration lines. The parameter THRES2 defines the threshold above the local background to detect the comparison lines. A way to estimate this value is to load the WLC on the display. Then choose an order with few bright lines and extract this order using EXTRACT/TRACE. Produce a plot via PLOT/IMAGE TRACE and choose the threshold level such that 7-12 lines (per order) will be above this level. To produce a hardcopy of the WLC give the commands:
LOAD/IMAGE image
COPY/DISPLAY
Now we can execute
CALIBRATE/ECHELLE
or
CALIBRATE/ECHELLE DONE ! If the order definition is already done.
Note For EFOSC reduction, the recommended method is TWO-D. In this method a bivariate polynomial is fitted to the initial identifications, instead of the monovariate polynomial involved in methods PAIR and ANGLE.
This command is the first step in the reduction. It finds the positions of the
orders and extracts the comparison lines. The user is prompted for the
identification of two calibration lines on the image display, repeated in
overlapped regions of adjacent orders. For a detailed description of
the wavelength calibration, see Section . This identification
is performed with the cursor. In case the orders are not overlapped, use
the method ANGLE:
SET/ECHELLE WLCMTD=ANGLE
CALIBRATE/ECHELLE DONE
which performs the wavelength calibration differently, this time prompting for a minimum of four identifications anywhere in the spectrum.
Press
in the control box of the display and provide the asked order
number and wavelengths.
If the automatic identification procedure does not converge to a satisfactory solution, use the level 1 command:
IDENTIFY/ECHELLE [wlc] [lincat] [dc] [tol] [wlcloop] [wlcmtd] [guess]
to compute new dispersion coefficients. Use commands:
PLOT/RESIDUAL
SEND/PLOT VERSATEC
READ/HISTOGRAM line.tbl :RESIDUAL 0.08 -0.04,0.04
to display the results. You have to specify all parameters, because you are dealing with level 1 commands. The definition of the orders should give a standard deviation of less than 0.5 pixel and the dispersion coefficients should be fitted to better than 0.2 pixel.
The extracted orders in the pixel domain can be resampled into wavelengths with the command REBIN/ECHELLE. A method to verify the wavelength calibration consists of extracting and resampling the wavelength calibration frame and displaying the resampled image with a large scaling factor on the Y-axis. The variation of wavelength coverage from one order to the next should be smooth. Different regions of the resampled image and in particular the overlaps can be verified with the command PLOT/SPECTRUM.
EXTRACT/ECHELLE {WLC} &w
REBIN/ECHELLE &w &r
PLOT/SPECTRUM &r 4000,4050
Solutions are computed by default for each independent order ( SET/ECH WLCOPT=1D). They can also be computed using a global bivariate polynomial ( SET/ECH WLCOPT=2D).
Once a solution has been obtained for a particular set-up, using either of the echelles, you should save the results via
SAVE/ECHELLE name
For all the observations done with the same instrumental set-up, one can now use in CALIBRATE/ECHELLE this dispersion relation as a first guess to the final coefficients by specifying the parameter GUESS:
SET/ECHELLE WLCMTD=GUESS GUESS=name
The main advantage is that when using the GUESS option, no interaction is required to identify the lines in CALIBRATE/ECHELLE. After searching for the lines which are to be used for the determination of the dispersion relation the program applies as a first guess the coefficients used in the session previously saved and then starts the automatic identification.
The command CALIBRATE/ECHELLE has proved to be extremely flexible and reliable. However, the first-time users might run into some problems. The most frequent problems are listed below and a suggestion for their cure is given: