Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.sao.ru/precise/Midas_doc/doc/94NOV/vol2/node228.html
Дата изменения: Fri Feb 23 14:02:04 1996 Дата индексирования: Tue Oct 2 18:37:49 2012 Кодировка: Поисковые слова: europa |
A tutorial command ( TUTORIAL/MVA) may be used to see the very straightforward way in which the methods described here are used. Help commands may also be used for the required syntax.
A few MIDAS Table commands, of particular interest for the use of multivariate routines, are mentioned here for convenience. Note that the multivariate routines use all columns and rows in the input tables, and hence tables must first be ``rearranged'', as desired, before analysis. MIDAS subsequently offers a powerful environment for plotting results.
To show the characteristics of table mytab, to read its values to the screen, to print it out on a good quality device, to delete column 4 of mytab, and to construct table mytab2 from mytab, with three columns (PC1, PC2 and PC3) in the former:
SHOW/TAB mytab
READ/TAB mytab
PRINT/TAB mytab
DELE/TAB mytab
PROJ/TAB mytab mytab2 :PC1 :PC2 :PC3
To select group 2 members, defined in column 4, from table MYTAB; then plot coordinates defined in columns 1 and 2; then select group 3 members; overlay the coordinates of these points on the initial plot with a different symbol; and finally to get a good quality hard--copy representation:
ASSIGN/PLOT LASER NOSPOOL
SELECT/TAB mytab.EQ.2
SET/PLOT STYPE=2
PLOT/TAB mytab![]()
![]()
SELE/TAB mytab ALL
SELE/TAB mytab.EQ.3
SET/PLOT STYPE=6
OVER/TAB mytab![]()
![]()
SEND/PLOT LASER
Since the scales of group 3 members, may differ from the scale of group 2 members in the above, it may be advisable to issue a SET/PLOT XAXIS= YAXIS= command, with attendant minima and maxima for the axis, before plotting.
For further details of parameters to these commands, and for other relevant commands, the Tables chapter in this manual should be consulted.
Also in this Tables chapter are some routines for regression.