Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.sao.ru/precise/Midas_doc/doc/94NOV/vol1/node29.html
Дата изменения: Fri Feb 23 14:07:41 1996 Дата индексирования: Tue Oct 2 17:20:38 2012 Кодировка: Поисковые слова: volcano pele |
The MIDAS table file system is described in detail in chapter 5 of this volume. Here we just explain briefly how to access the various elements in a table file. To do so, it is necessary to specify the table name, the column and the row. This is done in the following format:
table column row
where
table is the table name;
column is the desired column which can be referenced by label as
:col or by sequence number as #n;
row is the desired row referenced by number as
@n or by a value in a predefined reference column.
Like descriptor and keyword names, column labels are case insensitive.
The command:
READ/TABLE tname #3 @10
would display the element in column 3 of row 10 in table file
tname.tbl .
Similarly, the command:
READ/TABLE tname :MAGNITUDE 20.0
would access the element in the column labeled `MAGNITUDE'
and value 20.0 in the reference column (this reference column must have been
defined before via the SET/REF command).
Note, that we need not specify the file extension .tbl
as in the descriptor related commands.
All table commands default the data files to tables with extension .tbl.
Single table elements can also be written in a more direct way, via
table,column,row = value, e.g. to set the element in the 3rd row of the
column labeled :XREF in the table lola.tbl to 1.234, use
lola,:xref,@3 = 1.234
The value can also be an expression made up of constants and elements
of any MIDAS data structure, see the subsection .
Some of the commands dealing with tables are:
READ/TABLE, WRITE/TABLE, COMPUTE/TABLE, SHOW/TABLE, EDIT/TABLE,
COPY/TABLE.