Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.sao.ru/fetch/HL/leda/param/bri25.html
Дата изменения: Mon Dec 23 18:23:59 2013
Дата индексирования: Fri Feb 28 17:30:04 2014
Кодировка:
Поисковые слова: п п п п п п п п п п п п п п п п п р п р п

Documentation: LEDA: parameter: bri25

Mean surface brigthness within 25 mag isophot (B-band): bri25

bri25 (or amp25) is the apparent brightness : B + 5logD +3.63 + as

where B is the apparent magnitude in the B-band, logD is the logd25 diameter and
as is the inclination correction in magnitude per squared arcsec and is calculated as given below:

R is the axis ratio derived from logr25

k is the bulge to disk ratio and depends on morphological type as follows: k=0.754*10^(-0.2*t), if k >1 then k=1 (Simien and de Vaucouleurs)
K is the coefficient dlogD/db (where D is the isophotal diameter at surface brightness b). It depends on the morphological type t as:
K = 0.12-0.007*t if t < 0.
K = 0.094 if t >= 0.

and C is defined as (dlogD/dlogR) and has the fixed value of 0.04 according to Bottinelli et al. 1995, A&A296, 64.