Product Folder: TC211, 192- X 165-PIXEL CCD IMAGE SENSOR

Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.sao.ru/drabek/CCDP/ti/tc211.html
Дата изменения: Thu Apr 29 02:44:12 1999
Дата индексирования: Tue Oct 2 00:16:48 2012
Кодировка:

>> Semiconductor Home > Products > Mixed Signal and Analog > CCD IMAGERS Family >

TC211, 192- X 165-PIXEL CCD IMAGE SENSOR
Device Status: Active

> Description
> Features
> Datasheets
> Pricing/Samples/Availability
> Application Notes
> User Manuals

> Development Tools
> Applications

Description

The TC211 is a full-frame charge-coupled device (CCD) image sensor designed specifically for industrial applications requiring ruggedness and small size. The image-sensing area is configured into 165 horizontal lines each containing 192 pixels. Twelve additional pixels are provided at the end of each line to establish a dark reference and line clamp. The antiblooming feature is activated by supplying clock pulses to the antiblooming gate, an integral part of each image-sensing element. The charge is converted to signal voltage at 4 uV per electron by a high-performance structure with built-in automatic reset and a voltage-reference generator. The signal is further buffered by a low-noise two-stage source-follower amplifier to provide high output-drive capability.

The TC211 is supplied in a 6-pin dual-in-line ceramic package approximately 7,5 mm (0.3 in.) square. The glass window can be cleaned using any standard method for cleaning optical assemblies or by wiping the surface with a cotton swab soaked in alcohol.

The TC211 is characterized for operation from -10°C to 45°C.

This MOS device contains limited built-in gate protection. During storage or handling, the device leads should be shorted together or the device should be placed in conductive foam. In a circuit, unused inputs should always be connected to V_SS. Under no circumstances should pin voltages exceed absolute maximum ratings. Avoid shorting OUT to V_SS during operation to prevent damage to the amplifier. The device can also be damaged if the output terminals are reverse-biased and an excessive current is allowed to flow. Specific guidelines for handling devices of this type are contained in the publication Guidelines for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices and Assemblies available from Texas Instruments.

Features

Full-Frame Operation
Antiblooming Capability
Single-Phase Clocking for Horizontal and Vertical Transfers
Fast Clear Capability
Dynamic Range . . . 60 dB Typical
High Blue Response
High Photoresponse Uniformity
Solid-State Reliability With No Image Burn-In, Residual Imaging, Image Distortion, Image Lag, or Microphonics
6-Pin Dual-In-Line Ceramic Package
Square Image Area:

2640 um by 2640 um
192 Pixels (H) by 165 Pixels (V)
Each Pixel 13.75 um (H) by 16 um (V)

To view the following documents, Acrobat Reader 3.x is required.
To download a document to your hard drive, right-click on the link and choose "Save".

Datasheets

Full datasheet in Acrobat PDF: socs008b.pdf (173 KB)
Full datasheet in Zipped PostScript: socs008b.psz (168 KB)

Pricing/Availability/Samples

Orderable Device	Package	Pin	Temp	Status	Price (USD)	Quantity	Availability / Samples
TC211		6		ACTIVE	25.88	12	Check stock or order

Application Reports

CCD IMAGE SENSORS AND ANALOG-TO-DIGITAL CONVERSION (63 KB) (Abstract)
INTERLACE OPERATION IN TI VIRTUAL-PHASE CCD IMAGE SENSORS (29 KB) (Abstract)
TIMING CONSIDERATIONS FOR THE TC211 FULL-FRAME CCD IMAGE SENSOR (75 KB) (Abstract)

User Manuals

CCD IMAGE SENSOR EVALUATION KIT (127 KB)