|
Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.sao.ru/drabek/CCDP/ti/tc210.html
Дата изменения: Thu Apr 29 02:41:18 1999 Дата индексирования: Tue Oct 2 00:16:41 2012 Кодировка: Поисковые слова: m 63 |
TC210,
192- X 165-PIXEL CCD IMAGE SENSOR
Device Status: Active
> Description > Features > Datasheets > Application Notes |
| The TC210 is a full-frame charge-coupled device (CCD) image sensor
designed specifically for medical and industrial applications requiring
ruggedness and small size. The image-sensing area is configured into 165
horizontal lines each containing 192 pixels. Twelve additional pixels are
provided at the end of each line to establish a dark reference and line
clamp. The antiblooming feature is activated by supplying clock pulses
to the antiblooming gate, an integral part of each image-sensing element.
The charge is converted to signal voltage at 4 uV per electron by a high-performance
structure with built-in automatic reset and a voltage-reference generator.
The signal is further buffered by a low-noise two-stage source-follower
amplifier to provide high output-drive capability.
The TC210 is supplied in a 5-mm (0.20-in) diameter ceramic and clear plastic molded package with a glass window. The glass window can be cleaned using any standard method for cleaning optical assemblies or by wiping the surface with a cotton swab soaked in alcohol. The TC210 is characterized for operation from -10°C to 45°C. This MOS device contains limited built-in gate protection. During storage or handling, the device leads should be shorted together or the device should be placed in conductive foam. In a circuit, unused inputs should always be connected to VSS. Under no circumstances should pin voltages exceed absolute maximum ratings. Avoid shorting OUT to VSS during operation to prevent damage to the amplifier. The device can also be damaged if the output terminals are reverse-biased and an excessive current is allowed to flow. Specific guidelines for handling devices of this type are contained in the publication Guidelines for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices and Assemblies available from Texas Instruments. |
|
To view the following documents, Acrobat
Reader 3.x is required.
To download a document to your hard drive, right-click on the link and
choose "Save".
Full datasheet in Acrobat PDF: socs009b.pdf
(191 KB)
Full datasheet in Zipped PostScript: socs009b.psz
(183 KB)
CCD
IMAGE SENSORS AND ANALOG-TO-DIGITAL CONVERSION (63 KB) (Abstract)
INTERLACE
OPERATION IN TI VIRTUAL-PHASE CCD IMAGE SENSORS (29 KB) (Abstract)