Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.sao.ru/drabek/CCDP/TUTORIAL/BackIllum/tutorial-illum-acknow.htm
Дата изменения: Sat Feb 19 19:11:34 2011 Дата индексирования: Tue Oct 2 13:33:00 2012 Кодировка: Поисковые слова: reflection nebula |
Jim Janesick of PixelVision Inc.'s Advanced Sensors Division, in
collaboration with Taner Dosluoglu and the Advanced Development Group at Scientific
Imaging Technologies, Inc., designed the PlutoCCD and Adapt series of CCDs. Mr. Janesick
was also responsible for the development of the CCD Transfer Method, as well as the test
and characterization of the SandboxIII PlutoCCD CCDs. Tom Elliott of the California
Institute of Technologys Jet Propulsion Laboratory contributed a majority of the
PlutoCCD 9-micron CCD Transfer Curve test results. His work is noted where applicable. The
testing and optimization of the ADAPTIII CCD were performed by Alice Reinheimer of
PixelVision, Inc.s Commercial Systems Division. The low light level comparisons and
images of image intensified and back-illuminated CCD sensors reported in Section 7.0 were
performed by John L. Miller and Jim Byars of FLIR Systems, Inc., and Lt. Robert Ireland of
the USAF Phillips Laboratories, Kirtland AFB, NM. The authors would like to thank the
directors of PixelVision, Inc. and Scientific Imaging Technologies, Inc. for their
continued internal funding of advanced imaging technologies. This document was edited by
Stacey Easterbrooks, PixelVision, Inc. |