Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~phil/software/datataking/wapp/wappsoftware.html
Дата изменения: Mon Jan 9 19:43:00 2012
Дата индексирования: Tue Feb 5 13:22:50 2013
Кодировка:
Поисковые слова: п п п п п
wapp software

Wapp datataking software

jan12

Intro:

    There are 8 correlator boards that make up the wapp spectrometer. Each board has 16 hagen correlator chips. Each chip has 1024 lags and runs at 100 Mhz.  The correlator boards are grouped in pairs. Each pair interfaces to a linux computer via a multiplexer chassis and then edt parallel interface board.
    When used with alfa, a single correlator board services 1 beam of alfa. Since there are only 7 alfa beams, the last correlator board (8) gets a duplicate of the last alfa beam (6 counting 0..6). The splitting is done in the buffer amplifiers in the receiver room.
    When used in single pixel mode, there are 8 separate bands that can be placed within the IF band of the receiver.

Naming conventions:


cpu
 alfa beams
(0 based)
 SinglePix bands (0 based)
synths used (1 based)
wapp
 0
4
 0,synth1
4,synth 5
wapp2
 1
5
 1,synth 2
5,synth 6
wapp3
 2
6
 2, synth 3
6, synth 7
wapp4
 3
6
 3,synth 4
7,synth 8


Programs:

program
 runsOn (N= ,2,3,4)
 Files:
 function
wapprt
 wappN
wapprt.c
  • alfamux.c
  • card.c
  • clock.c
  • config.c
  • demux.c
  • demux9to3.c
  • fold.c
  • idemux.c
  • out.c
  • pulsar.c
  • sampler.c
  • scram_iflo.c
  • sdemux.c
  • snap.c
  • spectra.c
  • tcal.c
  • zlag.c
  • fits_init.c
  • interp.c
  • queue_pnt.c
 locations: Sources/Wapp
real time control of wapp correlator.
talks to wapp boards via edt card.
Start correlator, reads data, sends data to output device.
wappcon
 wappN
 wappcon.c
  • atten.c
  • disks.c
  • env.c
  • fits_init.c
  • snap.c
 Locations:Sources/Wapp
interface between Cima gui and wapprt.
wappdata
 pserverf
 wappdata.c
 Locations:Sources/Fits
Used for spectral line data recording (pulsar observing writes the data to disc from a thread in wapprt).
the 4 wapps send the measured spectra to wappdata (via a socket).
Wappdata selects the N spectra taken at the same time and writes them to disc.



home_~phil