Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~phil/mbeam/motor/alfamotorled.ps Дата изменения: Tue Apr 12 19:47:48 2011 Дата индексирования: Sun Feb 3 23:10:28 2013 Кодировка: Поисковые слова: redshift survey

Danaher Motion Kollmorgen System Operation
S OSTAR S an S OSTAR D Series
S ST RAT
The SERVOSTAR has a seven­segment indicator, called a Status Display that
indicates four types of states: Power­up, Steady State, Flashing State, and
Momentary State. The decimal point directly relates to the global drive enable.
Status Display
DR
STAT
D S A A ARA
Power­up Momentarily illuminates all display segments forming an and the
decimal point.
Steady State
o Faults
Displays the operational mode OPMODE of the drive ­ .
Flashing
State
sed to indicate an abnormal operating state:
f the position hold feature is active, the OPMODE number will flash
at a rate.
f a fault was detected, a flashing code will be displayed to identify
the fault. Some codes consist of a se uence of two or more digits see
Troubleshooting section . n general, these faults will cause a latched
disable sometimes controllable through software switches . To clear
fault, toggle remote enable e cept for Over urrent .
f the encoder initiali ation function E ST RT is active, the
OPMODE number will flash at a rate.
Momentary
Fault
Displays a character momentarily for ms before returning to the
steady state. The timer is resetable.
ommunications Error
F Drive is in Fold ac mode
Status Display D i al i t
D A T
STAT
DR STAT S
Steady OFF o power to the motor
Steady O Drive enabled, power to the motor
Flashing Drive enabled, power to the motor, but a motor safety feature has
been disabled for e ample, MD S .