Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~phil/hardware/rdev/131108/pnet.conf.fir35M_20131108 Дата изменения: Mon Nov 11 20:06:14 2013 Дата индексирования: Tue Apr 12 07:50:16 2016 Кодировка: Поисковые слова: п п п п п п п п п п п п

# Jeff Mock
# 2030 Gough
# San Francisco, CA 94109
# jeff@mock.com
# (c) 2004-2006
#
#
# $URL: https://www.mock.com/svn/pdev/trunk/sw/src/pnet.conf $
# $Id: pnet.conf 859 2007-01-19 04:20:18Z jeff $
#

# Sample pdev.conf file for testing
#

# include "boxes.conf"
[pdev]
# name IP address Beam Subband sp setup file server
#
#b0a pdev-111 0 0 0 gxa tdevs0
#b0a pdev-126 0 0 0 gxa pdevs0
b0a pdev-123 0 0 0 gxa pdevs0
# b0b pdev-107 0 1 1 gxa tdevs0

include "cal.conf"

# The signal processor ID and version number expected in the
# FPGAs
#
[sp 02.02]

# These are registers defs for the signal processor. A
#
#
[defs]
CREG_DEC_F 0
CREG_ROUND_EN 1
CREG_TUNE_L 2
CREG_TUNE_M 3
CREG_D1_COUNT_L 4
CREG_D1_COUNT_M 5
CREG_S2_COUNT_L 6
CREG_S2_COUNT_M 7
CREG_D2_COUNT_L 8
CREG_D2_COUNT_M 9
CREG_S3_COUNT_L 10
CREG_S3_COUNT_M 11
CREG_D3_COUNT_L 12
CREG_D3_COUNT_M 13
CREG_SHIFT_FIR 14
CREG_GP_SEL 15
CREG_ADC1_SEL 16
CREG_ADC2_SEL 17

[dump]
packet 0x0200000 # Size of each data packet
name sasdr_world
filesize 20000000 # in 1kbyte blocks
byteswap 1 # 0-7
adcclk 140.
magic 0x01234567 # Magic number for SP1 files
dma 65536 # DMA size from FPGA on spectrometer
gpoe 0x8 # Enable output on GPIO pins
ppssel 0 # GP input for PPS, default is 0
ppsedge 1 # set to one to use posedge of pps (default)
ppsforce 0 # Force a fake PPS to start obs (default is 0)

[header]
CREG_DEC_F
CREG_ROUND_EN
CREG_TUNE_L
CREG_TUNE_M
CREG_D1_COUNT_L
CREG_D1_COUNT_M
CREG_S2_COUNT_L
CREG_S2_COUNT_M
CREG_D2_COUNT_L
CREG_D2_COUNT_M
CREG_S3_COUNT_L
CREG_S3_COUNT_M
CREG_D3_COUNT_L
CREG_D3_COUNT_M
CREG_SHIFT_FIR
CREG_GP_SEL
CREG_ADC1_SEL
CREG_ADC2_SEL

[setup gxa]
CREG_DEC_F 1 # Decimation 1 = 35M, 2=20M, 3=10M, 4=5M, 5=2.5M, 6= 1M
CREG_ROUND_EN 0 # 1 = convergent rounding, 0 = truncation
CREG_TUNE_L 28087 # Set to 30 MHz = 920350135, 14043 MSB and 28087 LSB
CREG_TUNE_M 14043 # Tune center frequency word = Fcenter*2^32/140
CREG_D1_COUNT_L 17500 # Number of decimated samples to dump window1 LSB
CREG_D1_COUNT_M 0 # Number of decimated samples to dump window1 MSB
CREG_S2_COUNT_L 21000 # Number of decimated samples start of window2 LSB
CREG_S2_COUNT_M 0 # Number of decimated samples start of window2 MSB
CREG_D2_COUNT_L 63964
CREG_D2_COUNT_M 1
CREG_S3_COUNT_L 0
CREG_S3_COUNT_M 0
CREG_D3_COUNT_L 0
CREG_D3_COUNT_M 0
CREG_SHIFT_FIR 8 # Shift left fir output, 0=0, 1=1 etc.
CREG_GP_SEL 0 # 0 = GP0 selected
CREG_ADC1_SEL 0 # 0 = ADC0 selected ( transmitter)
CREG_ADC2_SEL 1 # 1 = ADC1 selected ( receiver )