Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.issp.ac.ru/lpcbc/DANDP/zntemsds.html
Дата изменения: Tue Dec 14 16:44:59 2010
Дата индексирования: Tue Oct 2 05:30:16 2012
Кодировка:
Поисковые слова: п п п п п п п п п п п п п п п п п п п п п п
ZnTe Safety Data Sheet

Material Safety Data Sheet

  •   1 Identification of substance:
      •  
    • Product details:
    • Trade name: Zinc telluride
    • Manufacturer/Supplier:

      • Institute of Solid State Physics, 
      Russian Academy of Sciences, 
      Laboratory of Physical-Chemical Basis of
      Crystallization 
      (LPCBC). 
      Chernogolovka, Moscow district, 142432 Russia. 
      Phone:+7-(496)-522-2074 
      Fax:+7-(496)-522-4691 
      E-mail: lpcbc82@issp.ac.ru
  •   2 Hazards identification
      •  
    • Hazard description: Xn Harmful
    • Information pertaining to particular dangers for man and environment

      • R 20/22 Harmful by inhalation and if swallowed.
  •   3 First aid measures
      •  
    • After inhalation

      • Supply fresh air. If required, provide artificial respiration. Keep patient warm.
      Seek immediate medical advice.
    • After skin contact

      • Immediately wash with water and soap and rinse thoroughly.
      Seek immediate medical advice.
    • After eye contact

      • Rinse opened eye for several minutes under running water. Then consult a doctor.
    • After swallowing Seek immediate medical advice.
  •   4 Fire fighting measures
      •  
    • Suitable extinguishing agents

      • Product is not flammable. Use fire fighting measures
      that suit the surrounding fire. 
    • Protective equipment:

      • Wear self-contained respirator.
      Wear fully protective impervious suit.
  •   5 Accidental release measures
      •  
    • Person-related safety precautions:

      • Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation
    • Measures for environmental protection:

      • Do not allow material to be released to the environment without proper governmental permits.
    • Measures for cleaning/collecting:

      • Dispose contaminated material as waste according to item 12. Ensure adequate ventilation.
  •   6 Handling and storage
      •  
    • Handling
    • Information for safe handling:

      • Keep container tightly sealed.
      Store in cool, dry place in tightly closed containers.
      Ensure good ventilation at the workplace.
    • Information about protection against explosions and fires:

      • No special measures required.
    • Storage
    • Requirements to be met by storerooms and receptacles:

      • No special requirements.
    • Information about storage in one common storage facility:

      • Store away from acids and oxidizing agents.
    • Further information about storage conditions:

      • Keep container tightly sealed.
      Store in cool, dry conditions in well sealed containers.
  •   7 Exposure controls and personal protection
      •  
    • Additional information about design of technical systems:

      • Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
    • Personal protective equipment
    • General protective and hygienic measures

      • The usual precautionary measures for handling chemicals should be followed.
      Keep away from foodstuffs, beverages and feed.
      Remove all soiled and contaminated clothing immediately.
      Wash hands before breaks and at the end of work.
    • Breathing equipment:

      • Use suitable respirator when high concentrations are present.
    • Protection of hands: Impervious gloves
    • Eye protection: Safety glasses
    • Body protection: Protective work clothing.
  •   8 Physical and chemical properties:
      •  
    • Form: Crystal chunks, Polycrystals, Single crystals,

      • Substrates and optical elements manufactured from the
      crystals. 
    • Color: Brown, reddish
    • Odor: odorless

      •  
    •                                      Value/Range  Unit    Method 

      •  
    • Melting point/Melting range:          1307 °C
    • Boiling point/Boiling range:       Not determined
    • Sublimation temperature / start:   Not determined
    • Flash point:                       Not applicable
    • Ignition temperature:              Not applicable
    • Decomposition temperature:         Not determined
    • Danger of explosion:

      • Product does not present an explosion hazard.
    • Explosion limits:                 Not applicable
    • Vapor pressure:    Negligible at room temperature
    • Density:                     5.633 g/cm3 (crystal)
    • Solubility in / Miscibility with

      •  
    • Water:                             Insoluble 
  •  9 Stability and reactivity
      •  
    • Thermal decomposition / conditions to be avoided:

      • Decomposition will not occur if used and stored according to specifications.
    • Materials to be avoided: acids and oxidizing agents

      •  
  •  10 Toxicological information
      •  
    • Primary irritant effect:
    • on the skin: Irritant to skin and mucous membranes.
    • on the eye: Irritating effect.
    • Sensitization: No sensitizing effects known.
    • Additional toxicological information:

      • To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
  •  11 Ecological information:
      •  
    • General notes:

      • Do not allow material to be released to the environment without proper governmental permits.
  •  12 Disposal considerations
      •  
    • Product:
    • Recommendation

      • Consult local or national regulations for proper disposal.
    • Uncleaned packagings:
    • Recommendation:

      • Disposal must be made according to official regulations.
  •  13 Transport information
      •  
    • DOT regulations:
    • Hazard class:             6.1
    • Identification number:    UN3284
    • Packing group:            III
    • Proper shipping name (technical name):

      • Tellurium compound, n.o.s., zinc telluride
    • Land transport ADR/RID  (cross-border)
    • ADR/RID class:            6.1 Poisonous substances
    • Item:                     57c
    • Danger code (Kemler):     60
    • UN-Number:                3284
    • Description of goods:     Tellurium compound, n.o.s., zinc telluride
    • Maritime transport IMDG:
    • IMDG Class:               6.1
    • UN Number:                3284
    • Packaging group:          III
    • Proper shipping name:     Tellurium compound, n.o.s., zinc telluride
    • Air transport ICAO-TI and IATA-DGR:
    • ICAO/IATA Class:          6.1
    • UN/ID Number:             3284
    • Packaging group:          III
    • Proper shipping name:     Tellurium compound, n.o.s., zinc telluride
  •  14 Regulations
      •  
    • Product related hazard informations:
    • Hazard symbols: Xn Harmful
    • Risk phrases: 20/22 Harmful by inhalation and if swallowed.
    • Safety phrases:

      • 9     Keep container in a well-ventilated place.
      36    Wear suitable protective clothing.
    • National regulations

      • All components of this product are listed in the U.S. Environmental Protection Agency Toxic Substances Control Act Chemical Substance Inventory.
    • Information about limitation of use:

      • For use only by technically qualified individuals.
  •  15 Other information:
      •  
      Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user.
       
    • Department issuing MSDS: LPCBC ISSP Rus. Acad. Sci.