Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.issp.ac.ru/libm/rffi97039/
Дата изменения: Sat Jan 12 12:54:03 2002 Дата индексирования: Tue Oct 2 01:06:49 2012 Кодировка: Поисковые слова: п п п п п п п п п р п р п |
Head of the project
D. Sc. B. B. Straumal - leading
research scientist
Participants
The technology of ionic implantation appeared in 60-s and was extencively applied in microelectronics and semiconductor technologies mainly for the creation of doped surface layers with definite conductivity. In these methods of ionic implantation the high energies of ion and low ionic fluxes are emplyed. Later the technologies were developed combining the thermal treatment of a material with ionic impantation from glue discharge. This method allows one to produce the surface layers with a high concentration of alloyng element (like nitrogen) with a thickness up to several tens of microns. These materials with alloyed layers can be used in machinery, car and aviation industry. Recently, we developed a novel Hall current accelerator which can be used for the low-voltage ionic implantation. This accelerator combines the relative low ionic energies (0.1. to 10 keV) with high dencities of ionic flux (up to 1–3 mA/cm2). Large aperture (up to 1400 mm) allows one the treatment of the large-area substrates. The ionic nitriding of austenitic stainless steel and ferritic low-carbon steel has been studied. The influence of ionic current, energy of ions and implantation time are determined. The depth profiles measured with the aid of secondary-ion mass spectroscopy are presented. The hardness after ionic nitriding is characterized. The anomally quick penetration of nitrogen penetration in the austenitic stainless steel having the dencely packed face centered cubic (fcc) latice is observed. The ideas about subplantion of ions and radiation-enhanced diffusion of nitrogen atoms into the substrate are used for the explanation of this effect. The possible influence of the grain boundary phase transitions leading the the formation of the metasable base centered cubic phase with high duffusion permeabilty at the grain boundaries in the fcc-iron is also discussed.
List of publications
1. B. B. Straumal, N.F. Vershinin,
S. A. Polyakov, A. Cantarero, M. Friesel
Formation and evolution of microstructure
of materials under the influence of
the low energy high density flux
of nitrogen ions (in Russian)
"Advanced materials and technologies.
Innovations of XXI century"
(Eds. Yu.A. Ossipjan et al.), Chernogolovka,
Russia (2001) p. 48. ISBN 5-901674-02-09
Download in PDF-format
2. B. B. Straumal, N. F. Vershinin,
S. A. Polyakov, M. Friesel, P. Fogarassy
Preparation of large area substrates
using high aperture Hall current accelerator
In: Pulverizarea termica,
D. Böhme et al. (eds.)
ISIM, Timisoara, Romania (2000)
193–199
Download in PDF-format
3. B. B. Straumal, N. F. Vershinin,
S. A. Polyakov, P. V. Orlova, M. Friesel, W. Gust
Ion cleaning and nitriding using
a high aperture Hall current accelerator
In: Progress in plasma processing
of materials 2001, ed. P. Fauchais,
Begell House, New York (2001) pp.
573–578.
Download in PDF-format
4. B. Straumal, N. F. Vershinin,
M. Friesel, T. V. Ischenko, S. A. Polyakov, W. Gust
Ionic nitriding of austenitic and
ferritic steel with the aid of a
high aperture Hall current accelerator
Def. Diff. Forum 194-199
(2001) 1457–1462
Download in PDF-format
Presentations at scientific conferences
1. B. B. Straumal, N.F. Vershinin,
S. A. Polyakov, A. Cantarero, M. Friesel
Formation and evolution of microstructure
of materials under the influence
of the low energy high density
flux of nitrogen ions (in Russian)
Regional conference "Investigations
and developments in the scientific towns of Moscow Region.
Advanced materials and technologies.
Innovations of XXI century" (poster)
October 01–05, 2001, Chernogolovka,
Russia