Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.iki.rssi.ru/mirrors/stern/stargaze/Itrig4.htm
Дата изменения: Wed Dec 3 05:09:44 2003 Дата индексирования: Tue Oct 2 17:29:54 2012 Кодировка: Поисковые слова: п п р р р р р р р р р р р р р р |
"Stargazers" introduced two ways of describing the position of a point P on a flat plane (e.g. a sheet of paper): cartesian coordinates (x,y) and polar coordinates (r,f). Both used for reference a point O ("origin") and some straight line through it ("x-axis"). In cartesian coordinates a second "y-axis" is drawn through O, perpendicular to the first, and lines parallel to the axes are then dropped from P, cutting the axes at the points A and B on the drawing. The distances OA and OB then give the two numbers which define P, the x and y coordinates of the point. In polar coordinates, the point P is defined by its distance r from the origin O (see drawing) and by its polar angle ("azimuth" on a map) between the x-axis and the "radius" r = OA, measured counter-clockwise. Since the figure OAPB is a rectangle, the distance AP also equals y. Therefore sinf = y/r Multiplying everything by r gives the relation between the two systems of coordinates (symbols standing next to each other are understood to be multiplied): x = r cosf These relations allow (x,y) to be calculated when (r,f) are given. To go in the opposite direction--given (x,y), find (r,f)--one notes that in the triangle OAP, by Pythagoras x2 + y2 = r2 Therefore, given (x,y), r can be calculated, and then (sinf, cosf) can be derived as before by sinf = y/r (except at the origin point O, where (x, y, r) are all zero and the above fractions become 0/0; any value can then be chosen for the angle f). However, there remains a problem. The angle f as defined above can go from 0 to 360°, but (sinf, cosf) are only defined for 0 to 90°, covering only the part of the plane where both x and y are positive. When one or both are negative, the angle f is larger than 90 degrees, and such angles never appears in any right-angled triangle. What sort of meaning can (sinf, cosf) have for f larger than 90 degrees? There is a simple solution, though: use the above equations to re-define sinf and cosf for such larger angles! The equations are sinf = y/r They are now viewed as new definitions of the sine and cosine, for the polar angle f given by x and y (a slightly different way of formulating this definition is described further below). If (x,y) are both positive, the result is exactly the same as for angles inside a right-angled triangle. But it also works for larger angles. The sine and cosine can now be negative (just like x and y) but their magnitude still cannot exceed 1, because the magnitude of x and y is never larger than r. Here are those signs: |
Range | sinf = y/r | cosf = x/r |
---|---|---|
0-90° | + | + |
90°- 180° | + | - |
180° - 270° | - | - |
270°-360° | - | + |
Allowing the line OP to go around the origin more than once allows the angle f to grow past 360°; the sine and cosine are still defined as y/r and x/r, and repeat their previous values. Similarly, turning OA in the opposite direction--clockwise--can define negative values of f. Together, these extensions define (sinf, cosf) for any angle f, positive or negative, of any size. The relation derived from Pythagoras' theorem sin2f + cos2f = 1 holds for any of those angles. If either the sine or the cosine is zero, the other function must be +1 or -1, depending on the sign of the coordinate (x or y) that defines them. At 90° and 270°, x = 0 and therefore cosf = 0, while at 0° and 180° y = 0 and therefore sinf = 0. We then get |
Angle | sinf = y/r | cosf = x/r |
---|---|---|
0° | 0 | +1 |
90° | +1 | 0 |
180° | 0 | -1 |
270° | -1 | 0 |
360° | 0 | +1 |
Of course, f = 0° and f = 360° represent the same position of r, namely, along the positive branch of the x-axis. Below is the actual plot of cosf: |
Next Stop (optional): #M-11 Deriving sin(a+b), cos(a+b)
Author and Curator: Dr. David P. Stern
Mail to Dr.Stern: audavstern("at" symbol)erols.com .
Last updated 25 November 2001