Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.eso.org/~jwalsh/softpol/polimplot.help.html
Дата изменения: Thu Nov 2 16:52:04 2000
Дата индексирования: Tue Oct 2 09:04:44 2012
Кодировка:
Поисковые слова: п п п п п п п п п п п п п п п п п
POLIMPLOT (V2.00) --- November00 --- POLIMPLOT (V2.00)

NAME

polimplot -- Plot a polarization vector map

USAGE polimplot inpol inpopa poi_err inpoer inpaer xybin poscal polow pohigh pacorr xysam polab title xlabel ylabel device left right bottom top erase

PARAMETERS

inpol = "" [name]
Input linear polarization image (in %) to plot.
inpopa = "" [name]
Input image for position angle of linear polarization vectors (degrees).
poi_err = "" [boolean]
Switch to control whether polarization errors are plotted as separate vectors.
inpoer = "" [name]
Name of corresponding polarization error image (%). Must be same size as polarization image.
inpaer = "" [name]
Name of corresponding polarization position angle error image (degrees). Must be same size as polarization image.
xybin = "" [integer]
Binning factor in x and y direction used to produce polarization images from data frames.
poscal = "" [real]
Scaling factor to convert linear polarization (in %) to length in pixels.
polow = "" [real]
Lowest value of percentage polarization to plot.
pohigh = "" [real]
Highest value of percentage polarization to plot.
pacorr = "" [real]
Additive correction to position angles for plotting.
xysam = "" [integer]
Number of points to skip in each axis when plotting vectors (0 to plot all pixel vectors).
polab = "" [boolean]
Switch to control labelling of plot.
title = "" [name]
Title for plot.
xlabel = "" [name]
Label for X (lower) axis.
ylabel = "" [name]
Label for Y (left) axis.
device = "" [name]
Graphics device for plot.
(left = "") [real]
Viewport limit in Normalised Device Coordinates (NDC): minimum X.
(right = "") [real]
Viewport limit in NDC: maximum X.
(bottom = "") [real]
Viewport limit in NDC: minimum Y.
(top = "") [real]
Viewport limit in NDC: maximum Y.
erase = "" [boolean]
Switch to control whether graphics device is erased before vector plot. Should be set false for hardcopy devices.

DESCRIPTION

This task is a flexible tool for plotting a polarization vector map from two images of the polarization and the position angle of the polarization vector. Whilst it can be used to plot general vector maps, it is primarily aimed at polarization maps, such as the output images from the task hstpolima.

If polarization and position angle error images are available there is an option to plot them as vectors centred on the plotted points but with larger and smaller lengths given by the plus and minus polarization error bars and rotations given by the maximum and mimumum offset angles specified by the plus and minus position angle errors. The 'error' vectors are plotted as dotted lines. Note however that the polarization and position angle errors may not strictly be 1 sigma errors, so this should be seen as an illustrative tool.

If the data has been binned in producing the polarization and position angle maps, and it is required to plot the vector map on the unbinned scale, then the binning factor must be supplied in order to match the polarization map with an unbinned image or plot. If the binning factor is not given then the labelled plot will display binned pixels only.

In order to convert the polarization in percent to a length, a scalar multipler is used to convert vector length to pixel length before plotting. A little trial and error, together with altering the parameter to control the parameter which sets the number of points to skip over in plotting (parameter xysam), will soon produce a map where the vectors do not overlay each other.

The range of polarization values to plot can be selected - this helps to avoid having points (dots) where the polarization is zero or very close to zero, or where there may be large polarization values (usually associated with large errors). An additive correction can be applied to the position angle values to ensure that the absolute position angle is plotted. Such rotations can be introduced by instrument rotation or realignment of images.

In order to overplot the polarization vector map on an image device (imd) it is necessary to specify the normalised device coordinates (NDC) of the left and right ends of the X axis and the bottom and top ends of the Y axis. Once an image has been displayed, the NDC of the four limits can be determined using stsdas.graphics.sdisplay imdisp_pos. The four values can then be entered in order to the parameters left, right, bottom, top. See the help for fieldplot and imdisp_pos for more details.

EXAMPLES

1. To plot an unbinned 512x512 pixel polarization map and 
vectors for the errors over the polarization range 2 to 100%, 
correcting the position angle by +12.5 degrees and plotting 
every fourth point, with axes and labelling on the standard 
graphics display in square format:


cl> polimplot inpol="nebpol.fits" inpopa="nebpa.fits" poi_err=yes
    inpoer="nebpoer.fits" inpaer="nebpaer.fits" xybin=1 
    poscal=0.25 polow=2.0 pohigh=100.0 pacorr=12.5 xysam=3
    polab=yes title="Reflection Nebula" xlabel="Alpha"
    ylabel="Delta" device="stdgraph" left=0.19 right=0.82
    bottom=0.12 top=0.96 erase=yes


2. To display an intensity image on the image display device,
determine the NDC of the corners of the displayed image and
overplot a polarization map which has been produced by binning the
raw data by 2x2, plotting the polarization range 1 to 50% and
plotting every second point, without error vectors or labelling:


cl> display ima="nebint.fits"
cl> imdisp_pos image="nebint.fits"
cl> lpar imdisp_pos
cl> polimplot inpol="nebpol.fits" inpopa="nebpa.fits" poi_err=no
    inpoer="" inpaer="" xybin=2 poscal=0.10 polow=1.0 pohigh=50.0 
    pacorr=0.0 xysam=1 polab=no title="" xlabel="" ylabel="" 
    device="imdr" left=0.3402 right=0.6598 bottom=0.3402 
    top=0.6598 erase=yes

BUGS

None known.

SEE ALSO

hstpolima, polimodel, fieldplot, imdisp_pos