Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.eso.org/~chummel/oyster/manual/node229.html
Дата изменения: Tue Apr 28 19:12:50 2015
Дата индексирования: Sun Apr 10 20:40:17 2016
Кодировка:
Поисковые слова: п п п п р п р п р п р п р п р п р п р п

Parameters

• InFiles: The order of the input files is irrelevant.
• DirFiles: These must be in the same order as InFiles and MaxPacket.
• MaxPacket: The maximum number of packets to process for each file
• DayNumber: Even though this number is in the data, some packet headers have the wrong number and it makes it a whole lot easier to have the user check and enter this number correctly. If observations started before 0 UT, choose the day number of that previous day. CONSTRICTOR will add a multiple of 24 hours to the time tag when the day number changes. Remember to set the StopTime to, say, 48 hours if you use a DayNumber of one less than the actual day number.
• StartTime:
• StopTime: These times are for day number corrected time tags, i.e. if the day number changes during the observations, 24 hours are added to the tags and compared to the StartTime and StopTime parameters. This means you may have to specify a StopTime of 48 hours.
• LogFile: The observers log file, usually named YYYY-MMDD.log. If none is found, none is included in the output.
• ScnFile: The star log file, usually names YYYY-MMDD-XXXXXX.starlog. If none is, none is included in the output.
• OutFile: The name of the output file, should be YYYY-MM-DD.con, or YYYY-MM-DD.coh. The latter extension can be used as a memo for files which will have coherently integrated visibilities added later by $\cal OYST\!ER$. Please do not use other extensions.
• Raw: Write the raw data of every scan into a separate HDS file. This can then be read by the COBRA scripts of $\cal OYST\!ER$. (Off)
• Lock: Only average continuous locks. (Off)
• Triple: Compute and write the triple product. (On)
• NumAv: Number of samples in an incoherent integration. (500)
• RefStation: Which station to reference delays to. Choose one which is common to all spectrometers. (1)
• SmartFDLAverage:Average the difference between measured and pred. delays? (Off)
• Metrology: Decode and pass on metrology data (On)
• Nat: Process NAT data (On)

Here is an example of a CONSTRICTOR parameter file.

InFiles = "/datacon11/2003-0330-104722.fringeData","/datacon11/2003-0330-105135.fringeData","/datacon11/2003-0330-143510.fringeData","/datacon11/2003-0330-143855.fringeData","/datacon11/2003-0330-144301.fringeData","/datacon11/2003-0330-030203.alignData","/datacon11/2003-0330-013326.sidData.1","/datacon11/2003-0330-013329.sidData.3"
DirFiles = "2003-03-30.1.dir","2003-03-30.2.dir","2003-03-30.3.dir","2003-03-30.4.dir","2003-03-30.5.d
ir","2003-03-30.6.dir","2003-03-30.7.dir","2003-03-30.8.dir"
MaxPacket =    5076,    5059,    4620,    4943,    5541,   17518,    1931,    1931
DayNumber =       89
StartTime = "00:00:00"
StopTime = "24:00:00"
LogFile = /datacon11/2003-0330.log
ScnFile = /datacon11/2003-0330-030621.starLog
OutFile = 2003-03-30.con
Raw = Off
Lock = Off
Triple = On
NumAv = 500
RefStation = 2
SmartFDLAverage = Off
Metrology = On
Nat = On