Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.eso.org/~chummel/midi/ews/intro.html
Дата изменения: Thu Oct 21 21:37:12 2004 Дата индексирования: Sat Dec 22 20:11:08 2007 Кодировка: Поисковые слова: astronaut |
To install the EWS system on your UNIX computer: 1. Define and create a root directory for the code and reference data. Specify this as an environmental variable drsRoot: mkdir /cool2/jaffe/ews setenv drsRoot /cool/jaffe/ews (csh) export drsRoot=/cool/jaffe/ews (sh) This assignment must be made whenever you want to use EWS, so it is most convenient to put it in a .login, .profile,.alias.... type file. 2. Copy the tar file EWS.tar.gz into this directory 3. Extract the tar file. e.g.: tar -xf EWS.tar.gz --ungzip (gnu tar sytax) 4. try gnu make: gmake install 5. cross your fingers. 6. In compiling the cfitsio library, the highest level routine uses a script called configure to try to determine your local system parameters and set up a corresponding cfitsio/Makefile. If the diagnostic messages from the cfitsio compilations look crazy, you have to edit the file $drsRoot/cfitsio/Makefile and insert reasonable values there. Look especially at the definition of CFLAGS in this file. After fixing cfitsio/Makefile, return to $drsRoot and type gmake install_c This should recompile the c-code using the new Makefile. If the make session ends with "mv: cannot stat `c/bin/disp*': No such file or directory ignore this, the mv was already executed in the previous run of gmake. 7. If the installation runs to completion, the following steps start things up: A. Make sure drsRoot is assigned as above B. assign the environment variable IDL_STARTUP to $drsRoot/EWS_STARTUP setenv IDL_STARTUP $drsRoot/EWS_STARTUP alternatively, add the code in this file to an existing IDL_STARTUP script. alternatively, AFTER STARTING IDL, type: @$drsRoot/EWS_STARTUP C. Go to your favorite directory and type; idl Then type: @vltisetup Hundreds of compilation messages should flash by. You should now be ready to start, e.g: cd,'data_directory' files1 = midiGuiS() output_tag = '/mydisk/reduced_data/source1' midipipe,output_tag,files=filesq 8. There are much more detailed descriptions of the EWS routines in the UserGuide in the $drsRoot/export directory