|
Engineering Department of the consumer goods manufacture,
which has acquired a broad experience in starting mass production
of such products as vacuum cleaners, food processors, mulitmixers
and the like, can offer the following engineering services:
- Marketing research on the customer-specified goods
- Studies of consumer and technical characteristics
of the customer- provided commodity samples. The
studies are conducted on the basis of laboratories
and stands available at the enterprise.
- Development of article design based upon customer's
input data, including generation of a 3D-Model of
an article and creation of design-mock-up by 3D-Model
using quick prototyping methods.
- Generation of design documentation and 3D-Model
of the parts and article as a whole guided by Customer's
Technical Specification with the process inspection
of the development based upon Customer's or ZEM's
manufacturing conditions.
- Customer's design documentation updating to suit
the conditions of specitic or ZEM mass or full-scale
production.
- Production of dimensional mock-ups of articles
by quick prototyping methods to check theix assembly
capability and operation.
- Production of pilot lot of articles by quick
prototyping methods with no preproduction.
- Analysis of Customer's design documentation for
manufacturability and development of the manufacturing
process to suit specific or ZEM-based production.
- Drawing up the specifications for equipment and
production tooling, including dies and molds, for
ZEM-based or other production.
- Equipment and tooling order, process inspection
and acceptance to suit Customer's needs.
|
|
|
The work is carried out within the PRO Engineer system,
including the following modules: Sheet Metal for sheet forming;
Plastic Adviser for spillage control of plastic parts; PRO/Mechanica
for dynamic, kinematic and Strength analysis; the module
for composite surfaces design. The developments to reduce
time are being carried out under a single Project using
the PRO/Intralink.
Telephone: 513-68-48; fax: 513-68-45
E-mail: Boris.Harlov@rsce.ru
|
|
)
)
)
)
)