| |
|
|
There is a plastic molding
shop on the territory of our enterprise.
A 200 m2 plastic molding shop is equipped
with 35 automatic molding machines (AMM), which produce
parts by pressure molding method from thermoplastic
polymeric materials. The installed AMMs made by NISSE
(Japan) and DEMAG (Germany) with clamping force varying
from 20 to 660 tons and injection volume from 18 to
2800 cm3 allow to manufacture a wide range
of parts up to 3 kg by mass.
More than 15 types of thermoplastic polymeric materials
are processed into finished products.
Most of the AMMs are fitted with the extra equipment
to support feedstock preparation and feeding, production
control, takeoff and transportation of products. All
this makes it possible to manufacture parts in a fully
automatic mode.
Also the shop can manufacture products from thermosetting
polymeric materials using automatic molding machines
for thermosetting materials (NISSEI, Japan) with clamping
force of 120 tons and a 314-cm3 injection
volume.
The shop is currently manufacturing completing items
for vacuum cleaners, food processors, electric mixers,
water purification filters and the like; there are altogether
more than 200 types of parts.
|
|
|
|
)
)
)
)