Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.atnf.csiro.au/people/Tasso.Tzioumis/sched/VLAMODE.html
Дата изменения: Unknown Дата индексирования: Sun Apr 10 07:35:29 2016 Кодировка: Поисковые слова: aurora |
VLAMODE is used to control phasing up of the VLA. The control can also be done directly by specifying the phasing related INTENTs, but that can be more cumbersome, especially if other INTENTs are changing from scan to scan. A phasing mode is required. For a schedule using the VLA, if SCHED does not get a VLAMODE or a phasing related INTENT, it will quit. When VLAMODE is used, SCHED will generate the appropriate INTENTs for the VEX file for the VLAMODE that is given.
VLA reference pointing and array phasing must not be requested in the same scan.
The valid VLAMODE values are: