Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.atnf.csiro.au/people/Tasso.Tzioumis/sched/Parameters_Specific_VLA.html
Дата изменения: Unknown
Дата индексирования: Sun Apr 10 11:37:16 2016
Кодировка:

Поисковые слова: п п п п п п п п п п п п п
Parameters Specific to the VLA next up previous contents
Next: VLA Standard Bands. Up: Old VLA Previous: VLA-Only Project Example   Contents


Parameters Specific to the VLA

The VLA capabilities in SCHED are for the old VLA system that has been shut down. Stay tuned for instructions related to running the EVLA (VLA).

This section gives a brief description of each of the parameters available to SCHED that are specifically for VLA observations or are especially useful for VLA observations. More general purpose SCHED parameters that are also required for other stations are not mentioned. For details on the parameters, consult the detailed descriptions of each parameter. The first list is of parameters in the main schedule input. The second is of setup parameters.

The parameters in the setup file that apply only to the VLA are below. They are used to set the band and bandwidths of the VLA and for setting up the ``//FI'' and ``//LO'' cards.

The values for all of these parameters, except FLUKESET, VLAIF, and VLAROT,, which are not normally needed, can be determined by SCHED from the frequency catalog. Therefore most projects do not require VLA specific parameters in the setup files.

The setup file parameters are:


next up previous contents
Next: VLA Standard Bands. Up: Old VLA Previous: VLA-Only Project Example   Contents
Craig Walker 2014-04-14