Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.atnf.csiro.au/computing/software/gipsy/sub/pgpanl.dc2 Дата изменения: Wed Oct 31 05:16:12 2001 Дата индексирования: Fri Jan 16 01:18:13 2009 Кодировка: Поисковые слова: dra

Name: PGPANL

Purpose: switch to a different panel on the view surface

Category: GRAPHICS

File: pgplot.src

Author: T.J. Pearson

Use: see description below.

Description:

SUBROUTINE PGPANL(IX, IY)
INTEGER IX, IY

Start plotting in a different panel. If the view surface has been
divided into panels by PGBEG or PGSUBP, this routine can be used to
move to a different panel. Note that PGPLOT does not remember what
viewport and window were in use in each panel; these should be reset
if necessary after calling PGPANL. Nor does PGPLOT clear the panel:
call PGERAS after calling PGPANL to do this.

Arguments:
IX (input) : the horizontal index of the panel (in the range
1 <= IX <= number of panels in horizontal
direction).
IY (input) : the vertical index of the panel (in the range
1 <= IY <= number of panels in horizontal
direction).

Updates: Oct 16, 1998: JPT automatically extracted from source.