Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.atnf.csiro.au/computing/software/gipsy/hermes/keytable.html
Дата изменения: Unknown Дата индексирования: Fri Jan 16 23:52:21 2009 Кодировка: Поисковые слова: р р р р с р р р п п с р р с р р с р с с р р с р р р р |
Whenever there is a change in one of the parameters, the display will be adjusted. If the amount of space on the screen is not sufficient to show all parameters, the user can page through the display just like paging through the log file. CTRL-V pages forward; CTRL-Z pages backwards. To inspect its keywords, the task need not be active. Typing ESC K again will remove the overlay screen.
`Behind the scenes' Hermes will remain active, but user communication with Hermes is not possible because all typing goes into the editor. Using this editor is the only way in tHermes to change input parameters for a task that is not active.
If Hermes cannot derive a name from either the parameter display or the UCA, it will prompt for a file name as if CTRL-X E was typed.