Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.atnf.csiro.au/computing/software/asap/userguide/node55.html
Дата изменения: Unknown Дата индексирования: Tue Feb 5 07:54:25 2013 Кодировка: Поисковые слова: п п п п п п п п п п п |
Currently multicomponent Gaussian function is available. This is done by creating a fitting object, setting up the fit and actually fitting the data. Fitting can either be done on a single scantable selection or on an entire scantable using the auto_fit function. If single value fitting is used, and the current selection includes multiple spectra (beams, IFs, scans etc) then the first spectrum in the scantable will be used for fitting.
ASAP>f = fitter() ASAP>f.set_function(gauss=2) # Fit two Gaussians ASAP>f.set_scan(scans) ASAP>selection = selector() ASAP>selection.set_polarisations(1) # Fit the second polarisation ASAP>scans.set_selection(selection) ASAP>scans.set_unit('km/s') # Make fit in velocity units ASAP>f.fit(1) # Run the fit on the second row in the table ASAP>f.plot() # Show fit in a plot window ASAP>f.get_parameters() # Return the fit paramaters
This auto-guesses the initial values of the fit and works well for data without extra confusing features. Note that the fit is performed in whatever unit the abscissa is set to.
If you want to confine the fitting to a smaller range (e.g. to avoid band edge effects or RFI you must set a mask.
ASAP>f = fitter() ASAP>f.set_function(gauss=2) ASAP>scans.set_unit('km/s') # Set the mask in channel units ASAP>msk = s.create_mask([1800,2200]) ASAP>scans.set_unit('km/s') # Make fit in velocity units ASAP>f.set_scan(s,msk) ASAP>f.fit() ASAP>f.plot() ASAP>f.get_parameters()
If you wish, the initial parameter guesses can be specified and specific parameters can be fixed:
ASAP>f = fitter() ASAP>f.set_function(gauss=2) ASAP>f.set_scan(s,msk) ASAP>f.fit() # Fit using auto-estimates # Set Peak, centre and fwhm for the second gaussian. # Force the centre to be fixed ASAP>f.set_gauss_parameters(0.4,450,150,0,1,0,component=1) ASAP>f.fit() # Re-run the fit
The fitter plot function has a number of options to either view the fit residuals or the individual components (by default it plots the sum of the model components).
Examples:
# Plot the residual ASAP>f.plot(residual=True) # Plot the first 2 componentsa ASAP>f.plot(components=[0,1]) # Plot the first and third component plus the model sum ASAP>f.plot(components=[-1,0,2]) # -1 means the compoment sum