Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.arcetri.astro.it/irlab/fasti/l3ccd/2014_4.pdf Дата изменения: Thu Jul 28 18:23:55 2005 Дата индексирования: Sat Dec 22 06:48:27 2007 Кодировка: Поисковые слова: m 101

Marconi Applied Technologies

IMAGING

PROVISIONAL
L3M ANALOG MODULES FOR LOW LIGHT LEVEL CCD SENSORS

> > > > >

DRIVE CIRCUITRY FOR CCD65 SENSOR MULTI-BOARD DESIGN FOR MAXIMUM USER FLEXIBILITY CLOCK MODULE FOR OPTIMUM SENSOR PERFORMANCE CAMERA CONTROL MODULE GIVES TOTAL OPERATING SOLUTION IDEAL FOR CAMERA MANUFACTURERS AND SYSTEM INTEGRATORS

The next revolution in imaging is here

TM


Marconi Applied Technologies

IMAGING

HV CLOCK MODULE

The HV Clock Module provides all the inputs required for driving the Marconi low light level CCD sensors. This complex operation is accomplished using a specially designed electronic solution that provides a simple interface for user operation.

System integration of the Marconi sensor is now made easier using simple input commands and signals.

· Size: 90 x 60 mm · Power: single 12V input · 7-pin interface for external control or direct connection to Camera Control Module · 0-50V output to CCD HV phase · Accepts clock frequency control · Gain control input (0-5VDC)

CAMERA CONTROL MODULE

Camera Control Module comprising of two stages, will provide a total working solution for the customer wishing to incorporate L3Vision sensors, with the minimum amount of electronics design. The Camera Control Module consists of a Buffer and Bias board together with a video logic board, and interfaces directly with the HV Clock Module allowing complete control of the CCD sensor.

The two boards of the control module are designed to run independently thus allowing the end-user to provide independent camera control, or as an integrated board-set capable of outputting a standard video signal. Such a system allows the video logic board to be used as a reference system for verifying electronic capability.

· Consists of two discrete PCBs Buffer & Bias board Video logic board (detachable) · Size: Buffer/Bias board 80 x 60 mm Video logic board 60 x 50 mm · Power: 12V input · 25 way D connector to CCD sensor · 7-pin interface for HV Clock Module · Interface for User control of CCD clock sequences · Interface for control with Marconi Video Logic board · Video output (1.25 mm two way connector)

Waterhouse Lane Chelmsford Essex CM1 2QU United Kingdom T +44 (0) 1245 493493 F +44 (0) 1245 492492 E-mail MTech.uk@marconi.com

16 Burospace 91572 Bievres Cedex France

4 Westchester Plaza Elmsford NY 10523-1482 United States of America T (914) 592 6050 F (914) 592 5148 Toll free 1-800 342 5338 E-mail MTech.usa@marconi.com
January 2001 issue 3

TM

T (331) 6019 5500 F (331) 6019 5529 E-mail info.marconitech@gec-france.fr